Floor Protection - Anti-Slip
Product Description
Safe Step™ 550 is a high solids, heavy duty, non-slip coating for application in slippery areas to make them safer for both pedestrian and rolling equipment traffic.
Safe Step™ 550 was developed for use in marine and industrial environments to provide a durable surface with the highest possible non-slip profile. The coating was engineered to with stand heavy traffic from forklifts, steel-wheeled vehicles and pedestrians. Formulated with epoxy resins to provide optimum toughness and corrosion resistance, Safe Step™ 550 is resistant to acids, alkalies, solvents, grease, oil, salt water, salt spray, detergents, alcohol, petrol, diesel, jet fuels, and hydraulic fluids. By virtue of its tenacious bond, rust will not creep under the coating if fractured. Safe Step™ 550 offers optimum adhesion to concrete and metal surfaces and the coatings sealed, nonporous surface make it easy to clean. |
Safe Step™ 100 is a single pack, epoxy ester anti-slip surface coating for heavy pedestrian traffic. This durable safety coating is both easy and fast to apply and offers optimum adhesion to metal, concrete and wood surfaces. Safe Step™ 100 is both chemical resistant and fire retardant in the cured state. It resists gasoline, oil, acids, alkalies and aliphatic solvents. |
Easifloor Binder (II) system is a trowel applied epoxy composite for application to concrete, steel and other subfloors where a chemically resistant, skid resistant and hard wearing surface is required. Please check with ITW Polymers & Fluids Technical Department for preparation of other surfaces not specified.
This Epirez flooring system offers good chemical resistance to a variety of reagents and is acceptable for steel wheeled vehicular traffic. Easifloor Binder (II) system solves the problem of bricks and tiles failing in floors from thermal and physical stress as well as those situations where concrete is destroyed by chemical and physical attack. Easifloor Binder (II) is supplied as a 2 part kit comprising Compound and Hardener, to complete the system requires addition of Epirez® Epoxy Mortar Aggregate Extender (QA3) and Epirez® Colourpack (as selected). |
Epitread® is a high solids, heavy duty, epoxy-based non-slip coating for application in slippery areas to make them safer for both pedestrian and rolling equipment traffic. Epitread® was developed for use in marine and industrial environments to provide a durable surface with a workable non-slip profile. The coating was engineered to withstand heavy traffic from forklifts, rubber-tyred vehicles and pedestrians.
It can be applied at low temperatures (minimum 5ºC) and also over slightly damp concrete surfaces to produce a very hard wearing, colourful surface suitable for heavy foot traffic and rubber-tyred vehicles. Formulated with epoxy resins to provide optimum toughness and corrosion resistance, Epitread® is resistant to acids, alkalis, solvents, grease, oil, salt water, detergents, alcohol, petrol, diesel, jet fuels, and hydraulic fluids. By virtue of its tenacious bond, rust will not creep under the coating if fractured. Epitread® offers optimum adhesion to concrete, metal surfaces and sealed coatings. |
Supatuff Heavy Duty Epoxy Coating (HD) is a high solids, high build, epoxy-based coating which provides excellent chemical and abrasion resistance to steel, concrete, timber and other surfaces. This product can also be used to prepare easy-clean floor surfaces for a wide range of industrial and commercial applications. Please check with ITW Polymers & Fluids Technical Department for preparation of other surfaces not specified.
Supatuff Heavy Duty Epoxy Coating (HD) has been especially formulated to provide long work time for ease of use. It can be applied at low temperatures (minimum 5ºC) and also over slightly damp concrete surfaces to produce a very hard wearing, colourful surface suitable for heavy foot traffic and rubber-tyred vehicles. The exceptional resistance to a wide variety of chemical spillage and fumes makes Supatuff Heavy Duty Epoxy Coating (HD) ideal for use in heavy industrial or marine environments. Supatuff Heavy Duty Epoxy Coating (HD) has been independently tested and meets the requirements of AS/NZS 4020 - 2002 for use in contact with potable water |
Sikafloor 261 is a 2-component solvent free pigmented epoxy resin based flooring system. The material can be classified into three systems:
1. Sikafloor-261: a high build roll on coat 2. Sikafloor-261 SL: a smooth self levelling floor topping system 3. Sikafloor-261 NS: an anti-slip self levelling floor topping system For an anti-slip self levelling floor topping use Sikafloor-261 NS for:
|
Sikafloor®-20 N PurCem® is a three part, resin rich, water dispersed, high strength, smooth trowel grade, coloured polyurethane modified, cement and aggregate screed suitable for floors subject to heavy loading, abrasion and chemical exposure. It has a textured aggregate surface providing medium to heavy profile slip resistance and is typically installed at 6 to 9 mm thick. Used in areas subject to heavy loading, abrasion and high chemical exposure, to provide a hard wearing surface, such as:
- Food processing plants, in wet or dry process areas, freezers and coolers, thermal shock areas
- Chemical plants
- Laboratories
- Workshops
Sikafloor®-21 N PurCem® is a three part, water dispersed medium to high strength coloured polyurethane modified, cement and aggregate screed with self-smoothing properties. It has an aesthetic, easy to clean; smooth textured aggregate surface providing medium slip resistance and is typically installed at 4.5 to 6 mm thick. Used in areas of medium to heavy loading,
abrasion and high chemical exposure, to provide a smooth, flat and decorative wearing surface, such as in:
abrasion and high chemical exposure, to provide a smooth, flat and decorative wearing surface, such as in:
- Food processing plants, in wet or dry process areas, freezers and coolers, thermal shock areas
- Chemical plants
- Laboratories
- Workshops
Sikafloor-HS is a high solids, heavy duty protective and decorative epoxy resin coating with excellent sag resistance. Sikafloor-HS is used on surfaces where cleanliness and hygiene are important in places such as:
• Production and storage areas. • Car parks and garages. • Underground car parks. • Food preparation industry. • Factories and manufacturing plants. • Warehouse and storage facilities. • Dairy manufacturing and processing plants. • Application on variable surfaces. |
BASF Concresive 2525 is a solvent free, high performance, versatile epoxy binder that can be used to produce a range of epoxy resin based mortars. Concresive 2525 can be applied to both dry and damp surfaces and adheres to most substrates after proper preparation. It is recommended for:
- Structural bonding of new to old concrete
- Production of epoxy resin mortars for floor toppings
- Production of epoxy resin mortars to grout bolt holes
- Steel bonding
- Rapid structural repair of concrete
- Grouting dowels
- Priming of concrete floors prior to applying Mastertop Flooring System and Conideck/Coniroof MembraneSystems to achieve structural bond
Mastertop 1080 is a durable floor coating based on a high build, hard wearing, two-component epoxy resin system. The cured floor provides excellent resistance to both chemical and mechanical damage. Mastertop 1080 has a user-friendly mix ratio and pot life and provides a hard, durable and glossy film. Mastertop 1080 may be applied to a wide variety of substrates (concrete, masonry, timber etc) and can be coloured to suit the environment. It is suitable for a wide variety of applications including:
|
BASF Mastertop 1220 is a slip resistant, seamless, industrial flooring system based on an advanced solvent free epoxy resin system and selected graded aggregates. The degree of slip resistance can be adjusted to suit a wide variety of conditions and cleaning requirements. The cured floor provides excellent resistance to both chemical and mechanical attack.
- Safety Non Slip internally & externally
- Food and beverage industry
- Chemical, cosmetics and pharmaceutical industries
- General production and packing areas
- Commercial and industrial kitchens
- Wet process and wash down areas
- Automotive, aircraft and engineering facilities
Dribond Deckgrip is a non-slip, durable, permanently flexible coating for foot trafficable areas.
It is used for decks, patios, stairs, walkways, pool surrounds, factories, boat decks and has the following features
|
Dribond Tile Grip is a liquid specifically designed to reduce the danger of slipping on wet tiles. It is recommended for use only on hard, thick floor glazes, ie mosaic and ceramic floor tiles.
Tile Grip can increase the coefficient of friction and reduce slip by as much as 70% on wet slippery floors. Typical floors include:Home bathroom and kitchen
|