Mortar Grout Epoxy Supplies
Phone: (02) 9622 2251 
​
  • Home
  • Adhesives and bonding agents
    • Anchor Adhesives
    • New to old Concrete
  • Concrete Patch & Repair Products
    • Crack Repair
    • Epoxy Patching Compound
    • Pre-Cast Patching Compound
    • High Build Render Patch
    • Moisture Barriers
    • Pavement & Roadway Repair
    • Water Plug
  • Epoxy Resin binders for patching and repair
    • Asid Resistant
    • Liquid
    • Non-Sag
  • Levelling Compounds
  • Floor Coatings
    • Acid Resistant
    • Anti-Slip
    • Clear Sealers
    • Colourpacks
    • Dust Proofing
    • Low Odour
    • High Build 3-5mm
    • Food Grade
    • High Solids
    • Roll-on Coating
  • Grouts
    • Cementitious >
      • Class A
      • Class c
      • Rapid Set
      • Sand Free
      • Highest Strength
    • Polymer Grouts & Anchors >
      • Deep Pour Apoxy
      • Extended Worktime
      • Backing Grouts
      • Liquid Apoxy
      • Anchor Grouts
      • Apoxy Crack Injection
      • Injection Ports & Packers
      • Under Water Grouts
    • Water Reactive Injection Resins
  • Sealants for joint and crack filling and repair
    • Epoxy PU Hybrids
    • Fire Retardant
    • Elastomeric Gungrade
    • Elastomeric Pourable
    • Saw Cut and Control Joint Sealants
    • Water-Reactive Injection Resins
    • Silicone
    • Primers
    • Tape Systems
    • Backing Rod
    • Guns
  • Coatings
    • 2-Pack Epoxy Finish
    • Steel Primers
  • Waterproofing and water plug products
    • Acrylic Membrance
    • Cementitious Membrance
    • Bitumenous Membrance
    • Polyurethane Membrance
    • Water Plug
    • Water Stops
  • Contact Us
Call Now for Fast Sydney Wide Delivery 02 9622 2251
Concrete Treatments - Protection - Chemical Resistant Coatings
Product                                                           Description
Picture
Supatuff Heavy Duty Epoxy Coating (HD) is a high solids, high build, epoxy-based coating which provides excellent chemical and abrasion resistance to steel, concrete, timber and other surfaces. This product can also be used to prepare easy-clean floor surfaces for a wide range of industrial and commercial applications. Please check with ITW Polymers & Fluids Technical Department for preparation of other surfaces not specified.
Supatuff Heavy Duty Epoxy Coating (HD) has been especially formulated to provide long work time for ease of use.
It can be applied at low temperatures (minimum 5ºC) and also over slightly damp concrete surfaces to produce a very hard wearing, colourful surface suitable for heavy foot traffic and rubber-tyred vehicles.
The exceptional resistance to a wide variety of chemical spillage and fumes makes Supatuff Heavy Duty Epoxy Coating (HD) ideal for use in heavy industrial or marine environments.
Supatuff Heavy Duty Epoxy Coating (HD) has been independently tested and meets the requirements of AS/NZS 4020 - 2002 for use in contact with potable water.
Picture
Epirez Supatuff Acid Resistant Coating (AR)

Supatuff Acid Resistant Coating (AR)
is a specially formulated acid resistant coating designed for application as a 300 – 500 micron coating system for concrete walls, columns and pump footings.
Supatuff Acid Resistant Coating (AR) is also suitable as a sealer for concrete floors where extreme chemical resistance is required. It resists a wide range of acids, including concentrated sulphuric acid, as well as alkalies and solvents.
Supatuff Acid Resistant Coating (AR) may be used with broadcast aggregate as a non-slip finish over this system.

Picture
Epirez Ultra High Build Epoxy Coating (733)
Ultra High Build Epoxy Coating (733) is a high performance self priming coating for application to steel and concrete. It is very suitable for long term protection to services and splash zone areas. It is applied by heavy-duty spray equipment in one application to at least 3mm DFT. Single applications of this thickness or more minimise application costs and times.

Ultra High Build Epoxy Coating (733) will cure underwater and stand early immersion making it an ideal maintenance coating for splash zone piling. It can be applied at low tide and will continue to cure under immersed conditions ensuring continual protection of wharf piling, old or new.

Ultra High Build Epoxy Coating (733) has been independently tested and meets the requirements of AS/NZS 4020 - 2002 for use in contact with potable water.

Picture
Sikagard-62
Sikagard-62 is a two component high build thixotropic protective coating based on epoxy resin. When cured, it provides a hard, glossy film with high resistance to abrasion and chemical attack.

Sikagard-62 has been successfully used for concrete and steel protection in the following applications: waterproof internal reservoir coatings, interior or exterior (when not subject to UV irradiation) protective coating for silos, pipes, tunnels and galleries. Also in laundries, factories, chemical process areas, sewage treatment works, dairies etc as an impervious chemical resistant coating for floors and walls.

Picture
Sikagard-63N
Sikagard-63N is a two component solvent-free high build thixotropic protective coating based on epoxy resin. When cured Sikagard-63N provides a hard, glossy film with high resistance to abrasion and chemical attack.

It is used as a heavy-duty abrasion resistant high build coating material, designed for high resistance against corrosion, weathering and moderate to severe chemical attack. Sikagard-63N is suitable for use on concrete, epoxy mortars, epoxy cements, sandblasted iron, steel, aluminium, non-polymer modified cementitious mortars and renders.  Sikagard-63N can be applied as a protective coating for silos, storage tanks, pipes, tunnels and galleries.  Also in laundries, factories, chemical process areas, sewage treatment works, dairies etc., as an impervious chemical resistant coating for floors and walls.

Picture
Dribond Epeshield
Epeshield is a water-based solvent free two pack epoxy coating which hardens to a tough porcelainic or ceramic like finish. It provides an impervious finish with excellent chemical resistance and can be applied over concrete, masonry and steel substrates for both exterior and interior use (will chalk externally).

Epeshield can be used for a wear and chemical resistant coating for manufacturing plants, concrete swimming pools, food processing industries, hospitals, laboratories, abattoirs, dairies, toilet floors, car parks and warehouses.