Mortar Grout Epoxy Supplies
Phone: (02) 9622 2251 
​
  • Home
  • Adhesives and bonding agents
    • Anchor Adhesives
    • New to old Concrete
  • Concrete Patch & Repair Products
    • Crack Repair
    • Epoxy Patching Compound
    • Pre-Cast Patching Compound
    • High Build Render Patch
    • Moisture Barriers
    • Pavement & Roadway Repair
    • Water Plug
  • Epoxy Resin binders for patching and repair
    • Asid Resistant
    • Liquid
    • Non-Sag
  • Levelling Compounds
  • Floor Coatings
    • Acid Resistant
    • Anti-Slip
    • Clear Sealers
    • Colourpacks
    • Dust Proofing
    • Low Odour
    • High Build 3-5mm
    • Food Grade
    • High Solids
    • Roll-on Coating
  • Grouts
    • Cementitious >
      • Class A
      • Class c
      • Rapid Set
      • Sand Free
      • Highest Strength
    • Polymer Grouts & Anchors >
      • Deep Pour Apoxy
      • Extended Worktime
      • Backing Grouts
      • Liquid Apoxy
      • Anchor Grouts
      • Apoxy Crack Injection
      • Injection Ports & Packers
      • Under Water Grouts
    • Water Reactive Injection Resins
  • Sealants for joint and crack filling and repair
    • Epoxy PU Hybrids
    • Fire Retardant
    • Elastomeric Gungrade
    • Elastomeric Pourable
    • Saw Cut and Control Joint Sealants
    • Water-Reactive Injection Resins
    • Silicone
    • Primers
    • Tape Systems
    • Backing Rod
    • Guns
  • Coatings
    • 2-Pack Epoxy Finish
    • Steel Primers
  • Waterproofing and water plug products
    • Acrylic Membrance
    • Cementitious Membrance
    • Bitumenous Membrance
    • Polyurethane Membrance
    • Water Plug
    • Water Stops
  • Contact Us
Call Now for Fast Sydney Wide Delivery 02 9622 2251
Floor Protection - Clear Sealers
Product                                                             Description
Epirez Supatuff Clear Coat Sealer (SC100)
Supatuff Clear Coat Sealer (SC100) is a solventless low viscosity epoxy floor sealer. It has been developed to offer excellent surface wetting, flow and air release for use as a seal coat over Epirez® Easifloor (II) and Epoxy Self Levelling (ESL) flooring systems. For specific surface preparation of concrete, please refer to ITW Polymers & Fluids Technical Department.

Supatuff Clear Coat Sealer (SC100) provides a clear, hard wearing, easily cleaned seal coat over other Epirez® flooring systems and over ground concrete.

Picture
Epirez Epoxy Clear Coating (113)
Epoxy Clear Coating (113) is a durable two part clear epoxy sealer designed to provide abrasion and chemical resistant to concrete floors. Epoxy Clear Coating (113) cures to a smooth, glossy finish which allows for easy cleaning but can also have an ‘anti-slip’ feature by incorporating Epirez® Patching & Flooring Mortar Aggregate (QA2).

Epoxy Clear Coating (113) provides an excellent economical hardwearing dust sealer for a wide range of industrial applications.
Picture
Epirez Epoxy Primer/Sealer (123)
Epoxy Primer/Sealer (123) is solvent free and low in viscosity. It has been developed to offer excellent surface wetting and compatibility with most Epirez binders, coatings and adhesives. It has been specially developed to bond to both dry and damp surfaces.

Epoxy Primer/Sealer (123) has a proven history in a variety of applications in the building and construction industry.

Field usage is aided by a convenient mixing ratio.

Picture
Davco Lanko 742 (Durashield)

Lanko 742 Durashield is a clear single pack, hard wearing, solvent based acrylic polymer surface sealer. Formulated at low viscosity to penetrate the capillary structure of concrete based materials to provide integral protection. Dried film exhibits excellent durability, toughness and water resistance. Non-yellowing formulation.

Picture
Sikafloor Duraseal
Sikafloor Duraseal is a one component penetrating non-yellowing protective sealer for concrete floors and driveways.
It is easy to apply by brush, roller or spray and has good resistance to oils, grease and tyre marks.
Sikafloor Duraseal is non-yellowing and suitable for exterior exposure. It is available in clear or grey.
Sikafloor Duraseal is used as a penetrating dust proof sealer for areas such as:
  • Warehouses and storage facilities
  • Cart Parks and garages
  • Light industrial buildings.
Sikafloor-PU is a one component, non-yellowing, aliphatic, moisture curing, polyurethane gloss coating containing UV light absorbers. It is ideal for interior and exterior seamless floors and can be used as a wear layer over deck coatings and nonslip coatings.
Sikafloor-PU can be used to seal plywood forms for precast concrete work and also as a concrete sealer and top coat and as an aggregate glaze for embedded nonslip aggregates. Its features include:
  • Flexible and water resistant.
  • Resistant to UV light.
  • One component moisture curing.
  • Clear, non-yellowing, high gloss finish.
  • Tough, hard wearing.
  • Excellent abrasion resistance.
  • Good chemical splash resistance for occasional spills.
Picture
Sikafloor-Curehard 24
Sikafloor Curehard 24 is a one part clear liquid, based on sodium silicate to cure, harden & seal fresh or hardened concrete.
It reacts with the calcium hydroxide in the concrete to produce an improved & dust resistant finish.
It is used for:
  • Horizontal new or old concrete surfaces, where a hard surface with light to moderate abrasion resistance is required.
  • Warehouses, industrial plants, stalls shopping malls, parking structures, service stations & hangars
  • On concrete slabs where no specific curing efficiency or standards are required.
Picture
Dribond Durathane
Dribond Durathane is a two-part polyurethane high gloss clear coating of medium viscosity.
It features:
  • Easy application – medium viscosity with self-levelling properties
  • Hard, non-yellowing, high gloss
  • Excellent adhesion to a variety of substrates
  • Excellent chemical resistance
  • Interior or exterior application
  • Water resistance (not suitable for full immersion)
Picture
Dribond Natural Sealer
Dribond Natural Sealer is a clear solvent based sealer that penetrates deep into concrete and masonry surfaces and hydrolyses in the pores and capillaries forming a weather and chemical barrier without changing appearance. It can be applied to concrete, bricks, stone and masonry surfaces to preserve its original appearance.
Its features are:
  • Quick acting – will repel water in approximately 2 hours
  • Long lasting tests have shown years of dependable protection
  • Seals surface from moisture and protects surface from atmospheric chemical attack
  • Will not darken or yellow with age
  • Reduced weather staining-vertical surfaces tend to be self cleaning
  • May be recoated at any time.
Picture
Dribond Kemcote Gloss

Dribond Kemcote Gloss is a clear gloss “wet look” non-yellowing, hard wearing, solvent based coating that highlights colour, seals & protects porous surfaces such as slate, unglazed tiles, stone, concrete, brick and block surfaces.

 Not to be used on terracotta.

Dribond Seal Coat is a waterbased sealer that penetrates deep into porous concrete and masonry surfaces and hydrolyses in the pores and capillaries forming a weather and chemical barrier with a water repellent matt finish.
It is used on porous concrete, bricks, stone, masonry surfaces, terracotta, tiles, pavers and grout to preserve their original appearance. Features are:
    • Quick acting – will repel water in approximately 2 hours
    • Long lasting – tests have shown years of dependable protection
    • Seals the surface from moisture and protects the surface from atmospheric chemical attack
    • UV resistant
    • Will not yellow with age
    • Reduced weathering staining – vertical surfaces tend to be self cleaning
BASF Masterseal 333 is a deep penetrating silicate solution for sealing and dust-proofing powdery or friable concrete and masonry surfaces. It is recommended for:
    • old concrete floors that are soft and starting to dust due to inadequate curing and/or low cement content
    • powdery or friable concrete and concrete block surfaces
    • new concrete surfaces to seal against oil, grease and many chemical solutions
BASF Masterseal 1120 is a premium grade solvent-based, non-yellowing acrylic sealer for beautifying, sealing and protecting slate, marble, quarry tiles, paving bricks, terrazzo and exposed aggregate panels or paving. Masterseal 1120 features include:
    • Seals and protects surfaces
    • Prevents staining and ingress of dirt, grime, oil or grease, foodstuffs, rust spotting, pitting dusting and discolouration
    • Glossy, durable finish
    • Brightens the colour and enhances the inherent natural beauty of slate and other similar materials.
    • Non-yellowing
    • Water-white transparent liquid which will not yellow indoors or outdoors. Maybe applied to light or dark coloured surfaces
    • Impervious surface
    • Resists water penetration, soap, mild acids and alkalis
    • Easy to maintain
    • Does not require subsequent waxing or polishing, surfaces are easy to clean
    • Easy to apply and dries quickly for quick return to service
BASF Mastertop TC 406 is a water based, two pack clear epoxy system formulated to provide ease of application, fast hardening and excellent adhesion to concrete. It is a hard wearing, anti-dusting sealer for a wide range of industrial and commercial applications. It is recommended for:

    • Warehouses
    • Factories
    • Car parks
    • Plant rooms
    • General industrial applications
Spirit Natural Paving Seal is a solvent-based penetrating seal leaving a natural look. It is used to give a high level of protection against food stains and day to day soiling for use on pavers such as Cement pavers, Sandstone pavers, Clay pavers and Brick Paving
Features are:
    • External use on all porous pavers.
    • Fast sealing and curing allows foot traffic in approximately one hour.
    • High resistance to both oil and water borne contaminants.
    • Permits vapour transmissions.
    • Mildew resistant.