Concrete Treatments - Protection - Concrete Primers
Product                                                             Description
Picture
Epirez Epoxy Primer Sealer (123)
Epoxy Primer/Sealer (123) is solvent free and low in viscosity. It has been developed to offer excellent surface wetting and compatibility with most Epirez binders, coatings and adhesives.
Epoxy Primer/Sealer (123) has been specially developed to bond to both dry and damp surfaces and
has a proven history in a variety of applications in the building and construction industry. Field usage is aided by a convenient mixing ratio.
Picture
Epirez Ezirender HB Primer

Ezirender HB Primer is a single pack Acrylic dispersion. It is non-toxic, non-flammable, resists acids, alkalis, fats and oils. The product promotes adhesion to a wide range of substrates, concrete, timber, etc.
Ezirender HB Primer’s unique bonding strength comes from its ability to effectively absorb into the concrete, timber, etc., to produce a positive mechanical and chemical bond ensuring adhesion.
Ezirender HB Primer is stable to light and highly resistant to ageing, has superior performance to resistance to hydrolysis (chemical breakdown) than P.V.A. emulsion in moist conditions such as wet cement.
Picture
Epirez Epoxy Mastic Metal Primer (215)
Epoxy Mastic Metal Primer (215) is a high build epoxy primer specially formulated to provide good adhesion and protection to poorly prepared steel surfaces.
Epoxy Mastic Metal Primer (215) provides an anti-corrosion protective barrier to structural steel surfaces subject to ultra-violet weathering, industrial pollution and precipitation. It can be applied over sound, aged coatings and has the ability to protect sharp edges, bolts, angles and other similar areas due to excellent high build characteristics.
In situations where only minimal surface preparation is allowable, Epoxy Mastic Metal Primer (215) will provide the best protection under the circumstances.
Epoxy Mastic Metal Primer (215) may be coated with various Epirez® topcoats
Picture
Bostik Bond N Cure


Bostik Bond N Cure is a milky white single component acrylic emulsion that is the recommended primer, bonding agent & curing compound for use with Bostik’s Patchfix range of concrete repair products.
Picture
Dribond Primax
Dribond Primax is a two pack, water resistant bonding primer with exceptional adhesion to difficult to adhere to surfaces. Primax will adhere to porous and non-porous surfaces that are difficult to adhere to if they are clean,
structurally sound and uncontaminated i.e.
• Porous and non-porous surfaces
• Helicoptered (smooth finish) concrete
• Immersed applications
• External areas.
Picture
Dribond Super Prime


Dribond Super Prime is a water based acrylic primer with solvent like penetration properties for use on
smooth/helicoptered/steel trowelled concrete. Super Prime improves adhesion and reduces air bubbles rising through levelling compounds.
Picture
Sika Monotop 610

Sika MonoTop-610 is a one-component, cementitious, polymer modified mortar containing silica fume and corrosion inhibitors. It is used as a treatment for preventing continued corrosion of steel reinforcement in concrete, and as a bonding bridge for concrete patching mortar. Sika MonoTop-610 is an integral component of the Sika MonoTop Concrete Repair System.
Picture
Sikadur-32

Sikadur-32 is a high performance bonding agent based on a 2-component solvent free epoxy resin ideally suited to a wide range of building and civil engineering applications.
Sikadur-32 may be used to bond epoxy mortars, fresh cementitious concrete or mortar to a wide variety of surfaces including mineral substrates (concrete, brick, stone, mortar, GRC, fibrous cement), wood, iron and steel and cured epoxy mortars. Sikadur-32 exhibits excellent adhesion enabling it to be successfully employed in both structural and non-structural situations.
Picture
Sikafloor-94


Sikafloor-94 is a 2-component epoxy-based primer of low viscosity. Used as a primer, penetrating sealer and bonding agent on Concrete, mortar stone, cement renderings, fibre cement and  timber.
Used as a bonding agent for epoxy mortar screeds and epoxy self-levelling floor toppings
Picture
Sikafloor-156

Sikafloor-156 is a 2-component epoxy-based primer of low viscosity.
Used as a primer, penetrating sealer and bonding agent on Concrete, mortar stone, cement renderings, fibre cement and timber.
Used as a bonding agent for epoxy mortar screeds and epoxy self-levelling floor toppings.
Picture
BASF Emaco 157 Primer (Formerly Barra Emulsion 57)
Emaco 157 Primer is an aqueous emulsion of styrenebutadiene copolymer latex, specially formulated for use in cementitious mixtures to improve wear resistance, durability, waterproofing and bonding properties.

Emaco 157 Primer is also compatible with sulphate-resisting or high alumina cement and gypsum plaster.
Picture
BASF Emaco 168 Primer (Formerly Barra Emulsion AC)
Emaco 168 Primer is an acrylic-latex bonding additive that replaces all or part of the mixing water in Portland cement-based mixes or bonding slurries to improvedurability and adhesive bond. It can be used on clean, sound concrete and sealed, wooden surfaces.

Emaco 168 can also be used as a primer for cementitious repair mortars.
BASF Concresive 2525 is a solvent free, high performance, versatile epoxy binder that can be  used to produce a range of epoxy resin based. mortars. Concresive 2525 can be applied to both dry and damp surfaces and adheres to most substrates after proper preparation.
It can be used for structural bonding of new to old concrete, production of epoxy resin mortars for floor toppings, production of
epoxy resin mortars to grout bolt holes,  steel bonding,  rapid structural repair of concrete and the grouting dowels priming of concrete
floors prior to applying Mastertop Flooring System and Conideck/Coniroof Membrane Systems to achieve structural bond.