Mortar Grout Epoxy Supplies
Phone: (02) 9622 2251 
​
  • Home
  • Adhesives and bonding agents
    • Anchor Adhesives
    • New to old Concrete
  • Concrete Patch & Repair Products
    • Crack Repair
    • Epoxy Patching Compound
    • Pre-Cast Patching Compound
    • High Build Render Patch
    • Moisture Barriers
    • Pavement & Roadway Repair
    • Water Plug
  • Epoxy Resin binders for patching and repair
    • Asid Resistant
    • Liquid
    • Non-Sag
  • Levelling Compounds
  • Floor Coatings
    • Acid Resistant
    • Anti-Slip
    • Clear Sealers
    • Colourpacks
    • Dust Proofing
    • Low Odour
    • High Build 3-5mm
    • Food Grade
    • High Solids
    • Roll-on Coating
  • Grouts
    • Cementitious >
      • Class A
      • Class c
      • Rapid Set
      • Sand Free
      • Highest Strength
    • Polymer Grouts & Anchors >
      • Deep Pour Apoxy
      • Extended Worktime
      • Backing Grouts
      • Liquid Apoxy
      • Anchor Grouts
      • Apoxy Crack Injection
      • Injection Ports & Packers
      • Under Water Grouts
    • Water Reactive Injection Resins
  • Sealants for joint and crack filling and repair
    • Epoxy PU Hybrids
    • Fire Retardant
    • Elastomeric Gungrade
    • Elastomeric Pourable
    • Saw Cut and Control Joint Sealants
    • Water-Reactive Injection Resins
    • Silicone
    • Primers
    • Tape Systems
    • Backing Rod
    • Guns
  • Coatings
    • 2-Pack Epoxy Finish
    • Steel Primers
  • Waterproofing and water plug products
    • Acrylic Membrance
    • Cementitious Membrance
    • Bitumenous Membrance
    • Polyurethane Membrance
    • Water Plug
    • Water Stops
  • Contact Us
Call Now for Fast Sydney Wide Delivery 02 9622 2251
Floor Protection - Dust Proofing
Product                                                        Description
Picture
Epirez Epoxy Clear Coating (113)
Epoxy Clear Coating (113) is a durable two part clear epoxy sealer designed to provide abrasion and chemical resistant to concrete floors. Epoxy Clear Coating (113) cures to a smooth, glossy finish which allows for easy cleaning but can also have an ‘anti-slip’ feature by incorporating Epirez® Patching & Flooring Mortar Aggregate (QA2).

Epoxy Clear Coating (113) provides an excellent economical hardwearing dust sealer for a wide range of industrial applications.

Picture
Sika Duraseal
Sikafloor Duraseal is a one component penetrating non-yellowing protective sealer for concrete floors and driveways.
It is easy to apply by brush, roller or spray and has good resistance to oils, grease and tyre marks.
Sikafloor Duraseal is non-yellowing and suitable for exterior exposure. It is available in clear or grey.
Sikafloor Duraseal is used as a penetrating dust proof sealer for areas such as: 

    • Warehouses and storage facilities
    • Cart Parks and garages
    • Light industrial buildings.
Picture
Sikafloor Curehard 24
Sikafloor Curehard 24 is a one part clear liquid, based on sodium silicate to cure, harden & seal fresh or hardened concrete. It reacts with the calcium hydroxide in the concrete to produce an improved & dust resistant finish.
It is used for:
    • Horizontal new or old concrete surfaces, where a hard surface with light to moderate abrasion resistance is required.
    • Warehouses, industrial plants, stalls shopping malls, parking structures, service stations & hangars
    • On concrete slabs where no specific curing efficiency or standards are required.
Picture
SDCW Sealer
SDCW Sealer is a solvent-based acrylic sealer which is designed to penetrate, restore and colour your concrete.

Available in clear and a range of colours, it allows you to coat your plain concrete (driveways, garage floors, patios, etc) or even change the colour of your current decorative concrete with a longer lasting alternative to paving paint and with all the benefits of a concrete sealer.

BASF Masterseal 333 is a deep penetrating silicate solution for sealing and dust-proofing powdery or friable concrete and masonry surfaces. It is recommended for:
    • old concrete floors that are soft and starting to dust due to inadequate curing and/or low cement content
    • powdery or friable concrete and concrete block surfaces
    • new concrete surfaces to seal against oil, grease and many chemical solutions
Picture
BASF Mastertop 1090
Mastertop 1090 is an indoor, economical floor sealer and primer based on an advanced solvent based, epoxy resin.
It provides high penetration into substrates with a glossy, easily cleaned, smooth finish, ideal for industrial applications.  Mastertop 1090 is ideal for priming under Mastertop 1080 and can provide non-skid textures as required.
Mastertop 1090 is recommended for:
    • Warehouse floors
    • Workshops
    • Printing and light manufacturing facilities
    • New concrete
    • Dustproofing
BASF Mastertop 1330 is an economical floor coating based on a solvent containing moisture cured polyurethane resin.
The cured material is clear and exhibits excellent resistance to mechanical and chemical attack. It is UV stable and will not yellow on exposure to UV light and may therefore be used externally. Mastertop 1330 possesses excellent adhesion to a wide variety of construction materials eg concrete, timber etc. Mastertop 1330 is used as the final wearing coat for the BASF Flake Floor System which provides a high standard of architectural finish, however the product may be used as a clear sealer/wearing coat for many industrial applications.

Picture
Dribond Natural Sealer
Dribond Natural Sealer is a clear solvent based sealer that penetrates deep into concrete and masonry surfaces and hydrolyses in the pores and capillaries forming a weather and chemical barrier without changing appearance. It can be applied to concrete, bricks, stone and masonry surfaces to preserve its original appearance.
Its features are:
  • Quick acting – will repel water in approximately 2 hours
  • Long lasting tests have shown years of dependable protection
  • Seals surface from moisture and protects surface from atmospheric chemical attack
  • Will not darken or yellow with age
  • Reduced weather staining-vertical surfaces tend to be self cleaning
  • May be recoated at any time.