Mortar Grout Epoxy Supplies
Phone: (02) 9622 2251 
​
  • Home
  • Adhesives and bonding agents
    • Anchor Adhesives
    • New to old Concrete
  • Concrete Patch & Repair Products
    • Crack Repair
    • Epoxy Patching Compound
    • Pre-Cast Patching Compound
    • High Build Render Patch
    • Moisture Barriers
    • Pavement & Roadway Repair
    • Water Plug
  • Epoxy Resin binders for patching and repair
    • Asid Resistant
    • Liquid
    • Non-Sag
  • Levelling Compounds
  • Floor Coatings
    • Acid Resistant
    • Anti-Slip
    • Clear Sealers
    • Colourpacks
    • Dust Proofing
    • Low Odour
    • High Build 3-5mm
    • Food Grade
    • High Solids
    • Roll-on Coating
  • Grouts
    • Cementitious >
      • Class A
      • Class c
      • Rapid Set
      • Sand Free
      • Highest Strength
    • Polymer Grouts & Anchors >
      • Deep Pour Apoxy
      • Extended Worktime
      • Backing Grouts
      • Liquid Apoxy
      • Anchor Grouts
      • Apoxy Crack Injection
      • Injection Ports & Packers
      • Under Water Grouts
    • Water Reactive Injection Resins
  • Sealants for joint and crack filling and repair
    • Epoxy PU Hybrids
    • Fire Retardant
    • Elastomeric Gungrade
    • Elastomeric Pourable
    • Saw Cut and Control Joint Sealants
    • Water-Reactive Injection Resins
    • Silicone
    • Primers
    • Tape Systems
    • Backing Rod
    • Guns
  • Coatings
    • 2-Pack Epoxy Finish
    • Steel Primers
  • Waterproofing and water plug products
    • Acrylic Membrance
    • Cementitious Membrance
    • Bitumenous Membrance
    • Polyurethane Membrance
    • Water Plug
    • Water Stops
  • Contact Us
Call Now for Fast Sydney Wide Delivery 02 9622 2251
Sealants - Elastomeric Pourable
Product                                                              Description
Picture
Joint Shield 5700
Joint Shield 5700 is a heavy duty, semi-rigid hybrid polyurea joint filler designed to fill and protect concrete joint edges and prevent sidewall spalling and chipping due to forklift traffic. Designed for use as a heavy duty joint filler for interior warehouse / industrial floors subject to heavy forklift traffic and loads.

Uses

Joint Shield 5700 is commonly used as a:
  • protecting concrete joint edges and preventing sidewall spalling in warehouse / industrial floors
  • Ideal joint filler for cold storage / freezer floors down to 0°F ( -17°C)
  • Repair for miscellaneous holes, cracks, and defects in concrete flooring.
Advantages
  • Available to open traffic in less than one hour
  • Can be shaved off flush with floor in about 30 minutes for a seamless transition from slab to slab
  • Wide curing temperature range, down to minus 17°C 
  • Self-levelling
  • Rapid cure
  • Good compression and recovery properties
  • Excellent abrasion resistance
  • Good chemical resistance
  • Two Component, convenient 1:1 ratio
BASF Masterflex 700 is a two-part polysulphide sealant whose base component consists of a specially formulated blend of liquid polysulphide polymer, plasticizers and fillers. When mixed with the curing agent it forms a tough, flexible, durable, rubber like material, which adheres to most common construction surfaces.

It is supplied in two grades – gun grade for vertical, overhead and general applications, and pouring grade for horizontal joints.

Masterflex 700 meets with the specifications of:
- BS 5212 (Pouring Grade)
- BS 4254: (Gun Grade), 1983
- US Federal Specification TT-S-00227E
- ASTM C920:79

Masterflex 700 forms long-lasting weather and watertight seals in joints subject to regular movement or permanent deformation.

Uses
Masterflex 700 Gun Grade is used for vertical joints in dams, reservoirs, water treatment plants, subways, culverts, seawalls, bridges, curtain walling, pre-cast concrete panelling and high rise buildings;
Masterflex 700 Pouring Grade is used for horizontal joints in bridges, concrete pavements, factory and garage floors
Advantages
  • Resistant to UV and weathering – extended life in exposed conditions
  • Tough, elastomeric and flexible – accommodates cyclical movement without rupturing
  • Excellent adhesion to most substrates – suitable critical joints which are subject to high levels of deformation or continuous cyclic movement
  • Non toxic – permits use in drinking water reservoirs
  • Unique single container packaging – removes problem of transferring correct amount of curing agent before mixing
BASF Sonomeric 1 is a one-part self-levelling polyurethane sealant for horizontal joints in chemical and industrial environments 

Uses

Active horizontal exterior joints exposed to chemical attack. Including airport runways and hangers, chemical bunds, industrial service roads and infrastructure. Substrates including concrete.

Advantages
  • Weather resistant - long performance.
  • Jet-fuel resistant - withstands chemical attack.
  • Exceptional elongation - tolerates joint movement.
  • No mixing - use directly from container.
  • No priming on most applications - easy to apply.
Picture
Parchem Thioflex 600 Pouring Grade
Thioflex 600 Pouring Grade is a multi-component joint sealant, based on a liquid polysulphide polymer, which when mixed and applied, cures to form a tough, rubber-like seal. The cured sealant exhibits excellent adhesion to most primed surfaces including concrete, aluminium and stainless steel.

Thioflex 600 Pouring Grade for joints in horizontal surfaces is supplied in grey colour only in 4 and 16 litre packs with the base and curing agent in separate tins. Thioflex 600 Pouring Grade is recommended for sealing expansion joints and stress relief joints in floors or other horizontal surfaces.