Mortar Grout Epoxy Supplies
Phone: (02) 9622 2251 
​
  • Home
  • Adhesives and bonding agents
    • Anchor Adhesives
    • New to old Concrete
  • Concrete Patch & Repair Products
    • Crack Repair
    • Epoxy Patching Compound
    • Pre-Cast Patching Compound
    • High Build Render Patch
    • Moisture Barriers
    • Pavement & Roadway Repair
    • Water Plug
  • Epoxy Resin binders for patching and repair
    • Asid Resistant
    • Liquid
    • Non-Sag
  • Levelling Compounds
  • Floor Coatings
    • Acid Resistant
    • Anti-Slip
    • Clear Sealers
    • Colourpacks
    • Dust Proofing
    • Low Odour
    • High Build 3-5mm
    • Food Grade
    • High Solids
    • Roll-on Coating
  • Grouts
    • Cementitious >
      • Class A
      • Class c
      • Rapid Set
      • Sand Free
      • Highest Strength
    • Polymer Grouts & Anchors >
      • Deep Pour Apoxy
      • Extended Worktime
      • Backing Grouts
      • Liquid Apoxy
      • Anchor Grouts
      • Apoxy Crack Injection
      • Injection Ports & Packers
      • Under Water Grouts
    • Water Reactive Injection Resins
  • Sealants for joint and crack filling and repair
    • Epoxy PU Hybrids
    • Fire Retardant
    • Elastomeric Gungrade
    • Elastomeric Pourable
    • Saw Cut and Control Joint Sealants
    • Water-Reactive Injection Resins
    • Silicone
    • Primers
    • Tape Systems
    • Backing Rod
    • Guns
  • Coatings
    • 2-Pack Epoxy Finish
    • Steel Primers
  • Waterproofing and water plug products
    • Acrylic Membrance
    • Cementitious Membrance
    • Bitumenous Membrance
    • Polyurethane Membrance
    • Water Plug
    • Water Stops
  • Contact Us
Call Now for Fast Sydney Wide Delivery 02 9622 2251
Sealants - Fire Retardant
Product                                                       Description
Picture
Sika Firerate
Sika Firerate is a gunable acrylic based jointing & sealing compound specially formulated with inorganic fillers to provide a fire barrier. Sika Firerate has been tested for fire resistance for up to 4 hours according to AS 1530.4 in masonry wall & floor joints.

Uses

Sika Firerate is suitable for sealing joints in concrete or masonry that must have a fire rated resistance to Australian Standards.

Sika Firerate also fulfils the basic function of a gap filler and joint sealant against water and dust penetration.

Advantages
  • Safe to use – contains no asbestos or fibres.
  • Paintable.
  • Good flexibility and adhesion to concrete and masonry.
  • Interior use only.
  • Easily applied with normal caulking equipment.
  • Easy tooling off.
  • Economical – single product for both fire proofing and sealing functions.
  • Water clean-up of tools and equipment while still uncured.
  • Excellent acoustic performance, test report available.
Picture
Sikaflex Firerate PU
Firerate PU is a one component, low modulus, gun grade, non-sag, moisture-cure polyurethane sealant with outstanding UV resistance. Firerate PU is designed to cure into a fire rated, elastic weatherproof seal.
Uses
Sika® Firerate PU is designed for sealing exterior and interior movement joints where a fire rating of up to 4 hours is required in:
  • Expansion and construction joints
  • Tilt-up construction
  • Precast and in-situ concrete
  • Brick and blockwork
  • Sealing in conjunction with fire collars or pillows
  • Window and door frame perimeter joints
  • Areas requiring intumescent sealing
  • Sika® Firerate PU also fulfils the basic function of a gap filler and joint sealant against water and dust penetration
Advantages
  • Fire rated up to 4 hours (AS1530 Part 4, AS4072 Part 1)
  • Superior UV resistance and durability
  • Permanently flexible
  • Accommodates 50% total joint movement
  • Non-staining
  • Single component - no mixing required
  • Excellent adhesion with no primer
  • Fast skinning time
Picture
Bostik Fireban 1
Fireban 1 is a fire rated, single component, low modulus polyurethane sealant curing via air humidity to form a elastomeric waterproof fire rated seal.

Uses
  • Sealing joints in expansion and construction joints in precast
  • Sealing joints in in-situ concrete, block and brick work
  • Penetration and core hole sealing on conjunction with fire collars or pillows or in areas requiring intumescent sealing
  • Sealing joints that require acoustic rating performance
Advantages

  • High durability
  • Excellent weathering resistance
  • Can be over painted
  • Non staining
  • 50% total joint movement minimum
  • Australian made
  • Excellent acoustic ratings
  • Fire rated up to 4 hour
Picture
Bostik Fire Caulk
Bostik Firecaulk is a single component, non-sag, fire rated acrylic based gunable sealant. A general purpose product for construction joints and the sealing of service penetrations in plasterboard, concrete floors and masonry wall constructions. Bostik Firecaulk is a gun grade acrylic based sealing compound specifically manufactured for sealing low movement interior joints (less than 5%) in masonry and plasterboard to provide a fire barrier for periods up to 4 hours.

Uses
  • Sealing of gaps around pipes, cables, ducts and services which penetrate fire rated walls and floors.
  • Fire rated cable penetration in concrete and masonry.
  • Installation of fire rated sealant in concrete walls and floors.
  • For vertical and horizontal joints, interior or exterior.
  • Application requiring acoustic properties or STC rating.
  •  Sealing joints in pre-cast panels.
  • Perimeter sealing of door and window framing.
  • Sealing gaps between faced and cladding panels to various building materials.
  •  To prevent the spread of fire and smoke through walls and floors.
Advantages

  • Fire resistance when tested in accordance with AS1530.4-1998, BS476: Part 20: 1987 and AS4072.1-1992
  • Fire rating for gaps up to 50mm.
  •  Good flexibility joint movement 5%
  • One part no mixing required.
  •  Smooth gunability and tool off finish
  • Low odour and Non-toxic
  • Asbestos free.
  • Priming not normally required.
  • Water clean up.
  • Prevents the passage of hot gases.
  • Paintable after 24 hours at 20°C.
  • Water resistant after cure (7 days after application).
  • Excellent adhesion to metal, wood, plasterboard and all masonry
  • Acoustic capabilities with STC rating in plasterboard construction.
BASF Masterflex 250 is an acrylic based sealant, formulated primarily to perform as barrier to the incursion of fire through expansion joints. Masterflex 250 sealant is also an effective acoustic sealant.

Uses

Sealing exterior and interior construction joints that are subject to movement (up to ±20%) in pre-cast concrete panels, block work and brickwork. Sealing gaps around cables, metal pipes, conduits, busways and ducts that penetrate walls, floors and ceilings. If a joint movement is not required, Masterflex 250 sealant can be used as a putty for filling holes in fire rated substrates. Substrates include metal, concrete, plasterboard and cable coverings.

Advantages

  • Fire rating for gaps up to 50mm.
  • Excellent acoustic sealing properties
  • Designed for Australian conditions
  • Good flexibility – joint movement ± 20%
  • Paintable
  • One part – no mixing
  • Very easy to apply and gives a smooth finish
  • Low odour
  • Non-toxic – contains no heavy metals such as antimony, cadmium, lead or mercury
  • Intumescent – expands when exposed to fire or heat above 90°C
  • Priming not normally required
  • Can be applied to damp surfaces
  • Water clean up
Picture
Parchem Flamex One
Flamex One is a fire rated, non-slump, waterborne, acrylic joint sealant which dries quickly forming a flexible seal
having good adhesion to most common building materials. It has very good application and finishing
characteristics and forms a smooth skin quickly. Flamex One is flexible and will accommodate up to +/- 10% of
structural movement between building components such as precast and insitu walls and ceilings, window and door
frames as well as pipe penetrations. Flamex One is intended for use in relatively low movement interior joints,
and is not suitable for use in water ponded or submerged applications.
Advantages and Uses:
  • “Tilt up” construction
  • High and low rise construction
  • Precast and insitu concrete
  • Service penetrations (metal pipes) through walls
  • Window/door frame perimeters
  • Economical waterborne formulation
  • Easy to apply and finish
  • Permanently flexible and paintable
  • Slump resistant -suitable for wide joints
  • Long shelf life
  • 4 hour fire rating
Picture
Parchem Flamex PU
Flamex PU is a one component, low modulus, gun grade, non-sag, moisture-cure polyurethane sealant with
outstanding UV resistance. Flamex PU is designed to cure into a fire rated, elastic weatherproof seal. Flamex PU will
accommodate 50% total joint movement while maintaining excellent weatherability.
Advantages & Uses:
    • Expansion and construction joints
    • Tilt-up construction
    • Precast, blockwork and plasterboard
    • Service penetrations (metal pipes) through walls
    • Sealing in conjunction with fire collar or pillows
    • Window and door frame perimeter joints
    • Acoustic joint sealing
    • Fire rated up to 4 hours (AS1530 part 4, AS4072 part 1)
    • Excellent UV resistance and durability
    • Permanently flexible
    • Accommodates 50% total joint movement
    • Non-staining and Paintable
    • Single component - no mixing required
    • Excellent adhesion with no primer
    • Fast skinning time