Floor Protection - Food Grade
Product Description
Supatuff Food Grade Finish (FG) is a solventless high build epoxy based coating which provides excellent chemical and abrasion resistance to steel, concrete, aluminium, timber and other surfaces. This product is ideal for the preparation of easy-clean floor and wall surfaces. Please check with ITW Polymers & Fluids Technical Department for preparation of other surfaces not specified.
Supatuff Food Grade Finish (FG) has been especially formulated to provide long work time for ease of use with spray equipment. However, drying time is short and recoating can easily be accomplished in the same shift. The non-taint and low odour properties of Supatuff Food Grade Finish (FG) make it ideal for use in food preparation areas. Supatuff Food Grade Finish (FG) has been tested by the CSIRO Food Research Laboratory for effect on tainting of food. Copy of this report is available on request. Supatuff Food Grade Finish (FG) requires the addition of an appropriate Epirez® Colourpack. |
BASF Mastertop 1050 is a high-build epoxy resin based coating which is designed to protect concrete, masonry and metal surfaces from chemical attack and corrosion. It is supplied as a solventless, three component system consisting of resin, hardener and colour pack. It is recommended for:
- Concrete floors, walls, drains, pipe work, storage tanks, equipment to provide protection against chemical attack and corrosion.
- Waterproofing of concrete and masonry surfaces, above or below grade.
- Use in the following industries: food and beverage, oil, chemical and fertiliser processing, marine, mining, sewerage treatment plants, printing and paper manufacturing, engineering and automotive servicing.
- In areas where hygiene and health requirements are important such as commercial kitchens, catering facilities, hospitals and veterinary surgeries and laboratories.
- For the positive side of walls.
Mastertop 1080 is a durable floor coating based on a high build, hard wearing, two-component epoxy resin system. The cured floor provides excellent resistance to both chemical and mechanical damage. Mastertop 1080 has a user-friendly mix ratio and pot life and provides a hard, durable and glossy film. Mastertop 1080 may be applied to a wide variety of substrates (concrete, masonry, timber etc) and can be coloured to suit the environment. It is suitable for a wide variety of applications including:
|
BASF Mastertop 1220 is a slip resistant, seamless, industrial flooring system based on an advanced solvent free epoxy resin system and selected graded aggregates. The degree of slip resistance can be adjusted to suit a wide variety of conditions and cleaning requirements. The cured floor provides excellent resistance to both chemical and mechanical attack.
- Safety Non Slip internally & externally
- Food and beverage industry
- Chemical, cosmetics and pharmaceutical industries
- General production and packing areas
- Commercial and industrial kitchens
- Wet process and wash down areas
- Automotive, aircraft and engineering facilities
BASF Mastertop 1245 is a solvent free, high performance, versatile epoxy binder that can be used as a binder to produce a range of epoxy resin based mortars for flooring. Mastertop 1245 can be applied to both dry and damp surfaces and adheres to most substrates after proper preparation.
Mastertop 1245 is recommended for the structural bonding of new to old concrete, the production of epoxy resin mortars for floor toppings, priming of concrete floors prior to applying Mastertop Flooring System, food production facilities, warehouses and workshops and manufacturing facilities
Mastertop 1245 is recommended for the structural bonding of new to old concrete, the production of epoxy resin mortars for floor toppings, priming of concrete floors prior to applying Mastertop Flooring System, food production facilities, warehouses and workshops and manufacturing facilities
Sikafloor 261 is a 2-component solvent free pigmented epoxy resin based flooring system. The material can be classified into three systems:
1. Sikafloor-261: a high build roll on coat 2. Sikafloor-261 SL: a smooth self levelling floor topping system 3. Sikafloor-261 NS: an anti-slip self levelling floor topping system For an anti-slip self levelling floor topping use Sikafloor-261 NS for:
|
Sikafloor-261T is a thixotropic, two component, solvent free, pigmented, 100% solids high build epoxy coating for heavy duty and decorative finishes. It can be applied to vertical surfaces (walls & covers) in addition to providing a textured floor coating. Sikafloor-261T is used on surfaces where cleanliness and hygiene are important. |
Sikafloor-HS is a high solids, heavy duty protective and decorative coloured epoxy resin coating with excellent sag resistance.
Sikafloor-HS is used on surfaces where cleanliness and hygiene are important in places such as:
|
Sikafloor 2530W is a high performance, coloured, two component water dispersed epoxy resin based protective & decorative coating for floors. It is used to provide a coloured seal coat system for light mechanical wear in areas such as:
|
Sikafloor®-20 N PurCem® is a three part, resin rich, water dispersed, high strength, smooth trowel grade, coloured polyurethane modified, cement and aggregate screed suitable for floors subject to heavy loading, abrasion and chemical exposure. It has a textured aggregate surface providing medium to heavy profile slip resistance and is typically installed at 6 to 9 mm thick. Used in areas subject to heavy loading, abrasion and high chemical exposure, to provide a hard wearing surface, such as:
- Food processing plants, in wet or dry process areas, freezers and coolers, thermal shock areas
- Chemical plants
- Laboratories
- Workshops
Sikafloor®-21 N PurCem® is a three part, water dispersed medium to high strength coloured polyurethane modified, cement and aggregate screed with self-smoothing properties. It has an aesthetic, easy to clean; smooth textured aggregate surface providing medium slip resistance and is typically installed at 4.5 to 6 mm thick. Used in areas of medium to heavy loading, abrasion and high chemical exposure, to provide a smooth, flat and decorative wearing surface, such as in:
- Food processing plants, in wet or dry process areas, freezers and coolers, thermal shock areas
- Chemical plants
- Laboratories
- Workshops
Sikafloor®-29 N PurCem® is a three part, water dispersed, vertical grade, coloured polyurethane modified, cement and aggregate mortar for detailing work and vertical rendering. It has a finely textured smooth aggregate appearance which offers excellent resistance to abrasion, chemical attack and mechanical damage. Typically installed at 3 - 9 mm thickness.
Sikafloor®-29 N PurCem® may be used in combination with the rest of the PurCem® range in concrete substrate areas, to provide vertical, coving and detailing solutions in areas of abrasion and high chemical exposure, such as in:
Sikafloor®-29 N PurCem® may be used in combination with the rest of the PurCem® range in concrete substrate areas, to provide vertical, coving and detailing solutions in areas of abrasion and high chemical exposure, such as in:
- Food processing plants, in wet or dry process areas, freezers and coolers, thermal shock areas
- Chemical plants
- Laboratories
- Workshops
Sikafloor®-31 N PurCem® is a three part, solvent free, high build, coloured, matt finish, polyurethane modified, cement and aggregate coating with excellent chemical resistance and very good resistance to abrasion and mechanical damage.
Typically applied in two coats for a total of 0.2 - 0.25 mm.
Sikafloor®-31 N PurCem is used in combination with Sikafloor-20N / 21 PurCem FG:
Typically applied in two coats for a total of 0.2 - 0.25 mm.
Sikafloor®-31 N PurCem is used in combination with Sikafloor-20N / 21 PurCem FG:
- As a high build coating
- As a chemical resistant concrete coating
- In food processing plants, chemical storage areas, warehouses, washrooms, laboratories, food preparation areas and chemical process plants.