Mortar Grout Epoxy Supplies
Phone: (02) 9622 2251 
​
  • Home
  • Adhesives and bonding agents
    • Anchor Adhesives
    • New to old Concrete
  • Concrete Patch & Repair Products
    • Crack Repair
    • Epoxy Patching Compound
    • Pre-Cast Patching Compound
    • High Build Render Patch
    • Moisture Barriers
    • Pavement & Roadway Repair
    • Water Plug
  • Epoxy Resin binders for patching and repair
    • Asid Resistant
    • Liquid
    • Non-Sag
  • Levelling Compounds
  • Floor Coatings
    • Acid Resistant
    • Anti-Slip
    • Clear Sealers
    • Colourpacks
    • Dust Proofing
    • Low Odour
    • High Build 3-5mm
    • Food Grade
    • High Solids
    • Roll-on Coating
  • Grouts
    • Cementitious >
      • Class A
      • Class c
      • Rapid Set
      • Sand Free
      • Highest Strength
    • Polymer Grouts & Anchors >
      • Deep Pour Apoxy
      • Extended Worktime
      • Backing Grouts
      • Liquid Apoxy
      • Anchor Grouts
      • Apoxy Crack Injection
      • Injection Ports & Packers
      • Under Water Grouts
    • Water Reactive Injection Resins
  • Sealants for joint and crack filling and repair
    • Epoxy PU Hybrids
    • Fire Retardant
    • Elastomeric Gungrade
    • Elastomeric Pourable
    • Saw Cut and Control Joint Sealants
    • Water-Reactive Injection Resins
    • Silicone
    • Primers
    • Tape Systems
    • Backing Rod
    • Guns
  • Coatings
    • 2-Pack Epoxy Finish
    • Steel Primers
  • Waterproofing and water plug products
    • Acrylic Membrance
    • Cementitious Membrance
    • Bitumenous Membrance
    • Polyurethane Membrance
    • Water Plug
    • Water Stops
  • Contact Us
Call Now for Fast Sydney Wide Delivery 02 9622 2251
Floor Protection - High Build
Product                                                 Description
Picture
Epirez Easifloor Binder (II)
The Easifloor Binder (II) system is a trowel applied epoxy composite for application to concrete, steel and other subfloors where a chemically resistant, skid resistant and hard wearing surface is required. 
This Epirez flooring system offers good chemical resistance to a variety of reagents and is acceptable for steel wheeled vehicular traffic. Easifloor Binder (II) system solves the problem of bricks and tiles failing in floors from thermal and physical stress as well as those situations where concrete is destroyed by chemical and physical attack.
Easifloor Binder (II) is supplied as a 2 part kit comprising Compound and Hardener, to complete the system requires addition of Epirez® Epoxy Mortar Aggregate Extender (QA3) and Epirez® Colourpack (as selected).

Picture
Epirez Epoxy Self Levelling Binder (ESL)
Epoxy Self Levelling (ESL) Flooring Kit applied as a solventless self levelling mix to prepared subfloors. It provides an extremely hard wearing and chemically resistant seamless floor surfacing. The ultra smooth finish achieved means that it offers very attractive appearance and easy cleaning.
Epoxy Self Levelling (ESL) Flooring Kit is available in a wide range of attractive colours for application throughout industry and the community.
Areas of application include: Aircraft hangars , Animal shelters, Brewery / distilleries, Car dealerships / service, Kitchens, Commercial Laundries, Manufacturing / production, Plant rooms, Supermarkets, Shops / malls, Television studios, Bottling Plants, Clean rooms, Industrial workshops, Hospitals, Hygiene areas, Laboratories, Pharmaceuticals, Showrooms, School rooms and Warehouses
Picture
Sikafloor-261
Sikafloor 261 is a 2-component solvent free pigmented epoxy resin based flooring system. The material can be classified into three systems:
1. Sikafloor-261: a high build roll on coat
2. Sikafloor-261 SL: a smooth self levelling floor topping system
3. Sikafloor-261 NS: an anti-slip self levelling floor topping system
For an anti-slip self levelling floor topping use Sikafloor-261 NS for:
  • Wet and dry process areas ie. beverage industry, bottling plants, dairies, meat processing plant etc.
  • Workshops and factories
  • Warehouses, loading bays and ramps
  • Hangars
Picture
Sikafloor-91
Sikafloor-91 is a 3-component solvent free epoxy resin based mortar for patching and screeding industrial floors subject to heavy traffic. It provides anti-slip chemical, abrasion and impact resistant epoxy resin floors of 5-40 mm thickness. Sikafloor-91 has high mechanical strength and provides an ideal floor where heavy loading and wear are encountered, eg. loading docks, workshops, heavy machine shops, warehouses, etc. Typical features include:
    • Easy handling
    • Solvent free
    • High bond strength to substrate
    • High abrasion resistance
    • High mechanical strength
    • Can be power floated
    • Anti-slip finish
    • Permeable to water vapour
Sikafloor®-20 N PurCem® is a three part, resin rich, water dispersed, high strength, smooth trowel grade, coloured polyurethane modified, cement and aggregate screed suitable for floors subject to heavy loading, abrasion and chemical exposure. It has a textured aggregate surface providing medium to heavy profile slip resistance and is typically installed at 6 to 9 mm thick. Used in areas subject to heavy loading, abrasion and high chemical exposure, to provide a hard wearing surface, such as:
    • Food processing plants, in wet or dry process areas, freezers and coolers, thermal shock areas
    • Chemical plants
    • Laboratories
    • Workshops
Sikafloor®-21 N PurCem® is a three part, water dispersed medium to high strength coloured polyurethane modified, cement and aggregate screed with self-smoothing properties. It has an aesthetic, easy to clean; smooth textured aggregate surface providing medium slip resistance and is typically installed at 4.5 to 6 mm thick. Used in areas of medium to heavy loading,  abrasion and high chemical exposure, to provide a smooth, flat and decorative wearing surface, such as in:
    • Food processing plants, in wet or dry process areas, freezers and coolers, thermal shock areas
    • Chemical plants
    • Laboratories
    • Workshops
Sikafloor®-29N PurCem® is a three part, water dispersed, vertical grade, coloured polyurethane modified, cement and aggregate mortar for detailing work and vertical rendering. It has a finely textured smooth aggregate appearance which offers excellent resistance to abrasion, chemical attack and mechanical damage. Typically installed at 3 - 9 mm thickness.
Sikafloor®-29N PurCem® may be used in combination with the rest of the PurCem® range in concrete substrate areas, to provide vertical, coving and detailing solutions in areas of abrasion and high chemical exposure, such as in:
  • Food processing plants, in wet or dry process areas, freezers and coolers, thermal shock areas
  • Chemical plants
  • Laboratories
  • Workshops
Sikafloor®-263 SL is a two part, multi purpose binder based on epoxy resin. It may be used as:
  • Self-smoothing and broadcast systems for concrete and cement screeds with normal up to medium heavy wear e.g. storage and assembly halls, maintenance workshops, garages, loading ramps etc.The broadcast system is recommended for wet process areas, e.g. in beverage industry, food industry, maintenance hangars etc.
Picture
Sikafloor 264
Sikafloor®-264 is a two part, solvent-free coloured epoxy resin. It may be used as roller coat for concrete and cement screeds with normal up to medium heavy wear e.g. storage and assembly halls, maintenance workshops, garages and loading ramps or as a seal coat for broadcast systems. Its features include:
      • Good chemical and mechanical resistance
      • Easy application
      • Economical
      • Liquid proof
      • Solvent-free
      • Gloss finish
      • Slip resistant surface possible
Picture
Sikafloor 266 CR
Sikafloor®-266 CR is a two part, low-emission, self-smoothing, textured and roller coating epoxy resin system designed for cleanrooms. It is especially designed for the in cleanroom environment, where low VOC and particle emissions are mandatory and is also suitable as a hard wearing course for many industries, such as automotive, pharmaceutical, storage facilities and warehouses. Features include:
  • Good chemical and mechanical resistance
  • Easy to clean
  • Economical
  • Liquid proof
  • Solvent-free
  • Gloss finish
  • Slip resistant surface possible
  • Low VOC-content Cetec Emission Study of Sikafloor-266 CR (Project
  • CV060813) in accordance with United States Environmental Protection Agency (USEPA)
Sikafloor-325 is a three component solvent-free pigmented self-levelling floor topping based on polyurethane.
It can be applied on mineral based substrates such as:

  • Concrete
  • Mortar
  • Epoxy modified cement mortars (ie. EpoCem)
Picture
Sikafloor 325
Sikafloor-325  may be used as a broadcast floor topping for:
  • Warehouses
  • Cold storage facilities
  • Parking decks and ramps
  • Production and storage facilities
Or as a self levelling floor topping of 1.5-2.0mm thickness for:
    • Industrial floors subjected to moderately heavy loading
    • Cold storage facilities
    • Production and storage facilities
    • Factory work shops
BASF Mastertop 1220 is a slip resistant, seamless, industrial flooring system based on an advanced solvent free epoxy resin system and selected graded aggregates. The degree of slip resistance can be adjusted to suit a wide variety of conditions and cleaning requirements. The cured floor provides excellent resistance to both chemical and mechanical attack.
  • Safety Non Slip internally & externally
  • Food and beverage industry
  • Chemical, cosmetics and pharmaceutical industries
  • General production and packing areas
  • Commercial and industrial kitchens
  • Wet process and wash down areas
  • Automotive, aircraft and engineering facilities
BASF Mastertop 1230 is a seamless, self-smoothing architectural flooring system based on an advanced solvent free epoxy resin system and selected graded aggregate. The smooth impervious surface finish provides an easily cleaned and hygienic surface with excellent resistance to chemical and mechanical attack.
It is recommended for:
    • Pharmaceutical and cosmetic industries
    • Laboratory areas
    • Medical facilities
    • Clean rooms and other sterile areas
    • Showrooms
    • Decontaminable areas
    • T.V. studios
    • Warehouses and high rack storage
    • Laundries
BASF Mastertop 1245 is a solvent free, high performance, versatile epoxy binder that can be used as a binder to produce a range of epoxy resin based mortars for flooring. Mastertop 1245 can be applied to both dry and damp surfaces and adheres to most substrates after proper preparation.

Mastertop 1245 is recommended for the structural bonding of new to old concrete, the production of epoxy resin mortars for floor toppings, priming of concrete floors prior to applying Mastertop Flooring System, food production facilities, warehouses and workshops and manufacturing facilities
Parchem Durafloor SL is a self smoothing, solvent free epoxy screed. It is supplied as a pre-measured, multi-component system ready for on-site mixing. When laid, it provides a smooth, durable surface. It is available in a wide range of standard colours, and if required, can be overcoated with Durafloor HP to provide anti-slip finishes. Features include:

  • Applied from 2 - 4 mm thickness
  • High flow characteristics combined with an attractive self smoothing finish
  • Fast application - minimises downtime
  • Chemically resistant - good resistance to a wide range of chemicals
  • Durable - good abrasion resistance
  • Hygienic - provides a dense, impervious, seamless floor surface which is easily cleaned
  • Attractive - available in a wide range of colours to enhance the working environment
  • Durafloor SL is suitable for use in food processing areas, where non-taint is important
Parchem Durafloor TF Binder is a two-part low viscosity epoxy resin system to which Durafloor TF Fillers and a Durafloor colour pack can be added to produce the trowellable epoxy mortar (Durafloor TF) for the installation of a high performance industrial floor system.
Durafloor TF, when laid, produces a matt, slightly textured anti-slip floor system. It can be overcoated to provide different non-slip and sealed properties. The product can also be produced in a range of standard colours.
Durafloor TF is:
  • Suitable for application in food preparation areas
  • Durable - provides long-term protection in heavy industrial environments
  • Improves efficiency - seamless surface aids traffic flow and cleaning
  • Good resistance to a wide range of industrial chemicals
  • Tough - resists high impact and point loading
Parchem Durafloor N is a complete protection system for concrete and other hard substrates for where aggressive chemical spillages occur and high wear resistance is required. The Durafloor N system enables a variety of application techniques including trowel floor, self-smoothing floor or top coating. If aesthetics are important, a standard colour range is available for any of the application systems.

A non-slip finish can be obtained to a desired result by the use of any of the Parchem non-slip aggregates applied between two coats of the top coat system.

Durafloor N is supplied as a clear binder system able to be added to a variety of filler systems to produce a desired consistency or as a tintable coating system. Durafloor N clear binder can be mixed with an appropriate filler system to produce a flowable grout to support equipment and structural steel for where dynamic loads occur and high chemical resistance is essential.

The product is also supplied in 5 litre kits as Durafloor N Top Coat for use with a colour pack system.