Floor Protection - High Solids
Product Description
Epirez Supatuff Heavy Duty Coating (HD) Neutral
|
Supatuff Heavy Duty Epoxy Coating (HD) is a high solids, high build, epoxy-based coating which provides excellent chemical and abrasion resistance to steel, concrete, timber and other surfaces. This product can also be used to prepare easy-clean floor surfaces for a wide range of industrial and commercial applications. Please check with ITW Polymers & Fluids Technical Department for preparation of other surfaces not specified.
Supatuff Heavy Duty Epoxy Coating (HD) has been especially formulated to provide long work time for ease of use. It can be applied at low temperatures (minimum 5ºC) and also over slightly damp concrete surfaces to produce a very hard wearing, colourful surface suitable for heavy foot traffic and rubber-tyred vehicles. The exceptional resistance to a wide variety of chemical spillage and fumes makes Supatuff Heavy Duty Epoxy Coating (HD) ideal for use in heavy industrial or marine environments. Supatuff Heavy Duty Epoxy Coating (HD) has been independently tested and meets the requirements of AS/NZS 4020 - 2002 for use in contact with potable water. |
Epirez Supatuff Food Grade Finish (FG)
|
Supatuff Food Grade Finish (FG) is a solventless high build epoxy based coating which provides excellent chemical and abrasion resistance to steel, concrete, aluminium, timber and other surfaces. This product is ideal for the preparation of easy-clean floor and wall surfaces. Please check with ITW Polymers & Fluids Technical Department for preparation of other surfaces not specified.
Supatuff Food Grade Finish (FG) has been especially formulated to provide long work time for ease of use with spray equipment. However, drying time is short and recoating can easily be accomplished in the same shift. The non-taint and low odour properties of Supatuff Food Grade Finish (FG) make it ideal for use in food preparation areas. Supatuff Food Grade Finish (FG) has been tested by the CSIRO Food Research Laboratory for effect on tainting of food. Supatuff Food Grade Finish (FG) requires the addition of an appropriate Epirez® Colourpack. |
Sikafloor HS
|
Sikafloor-HS is a high solids, heavy duty protective and decorative epoxy resin coating with excellent sag resistance.
Sikafloor-HS is used on surfaces where cleanliness and hygiene are important in places such as:
|
Sikagard 62
|
Sikagard-62 is a two component high build thixotropic protective coating based on epoxy resin. When cured, it provides a hard, glossy film with high resistance to abrasion and chemical attack. Sikagard-62 has been successfully used for concrete and steel protection in the following applications: waterproof internal reservoir coatings, interior or exterior (when not subject to UV irradiation) protective coating for silos, pipes, tunnels and galleries. Also in laundries, factories, chemical process areas, sewage treatment works, dairies etc as an impervious chemical resistant coating for floors and walls.
|
Sikafloor 261T
|
Sikafloor-261T is a thixotropic, two component, solvent free, pigmented, 100% solids high build epoxy coating for heavy duty and decorative finishes. It can be applied to vertical surfaces (walls & covers) in addition to providing a textured floor coating. Sikafloor-261T is used on surfaces where cleanliness and hygiene are important. |
Sikafloor®-20 N PurCem® is a three part, resin rich, water dispersed, high strength, smooth trowel grade, coloured polyurethane modified, cement and aggregate screed suitable for floors subject to heavy loading, abrasion and chemical exposure. It has a textured aggregate surface providing medium to heavy profile slip resistance and is typically installed at 6 to 9 mm thick. Used in areas subject to heavy loading, abrasion and high chemical exposure, to provide a hard wearing surface, such as:
- Food processing plants, in wet or dry process areas, freezers and coolers, thermal shock areas
- Chemical plants
- Laboratories
- Workshops
Sikafloor 264
|
Sikafloor®-264 is a two part, solvent-free coloured epoxy resin. It may be used as roller coat for concrete and cement screeds with normal up to medium heavy wear e.g. storage and assembly halls, maintenance workshops, garages and loading ramps or as a seal coat for broadcast systems. Its features include:
|
Sikafloor®-264T is a thixotropic 2-component solvent free pigmented 100% solids high build epoxy coating for heavy duty and decorative finishes. It can be applied to vertical surfaces (walls & covers) in addition to provide a textured floor coating.
Sikafloor®-264T is used on surfaces where cleanliness and hygiene are important. These include:
Sikafloor®-264T is used on surfaces where cleanliness and hygiene are important. These include:
- Food processing industry
- Chemical/pharmaceutical industry
- Power stations
- Plastics Industry
- Laboratories and rooms subject to radiation
- Clean rooms, exhibition halls and showrooms
- Demonstration areas and training rooms
- Washrooms, cloakrooms
Sikafloor 266 CR
|
Sikafloor®-266 CR is a two part, low-emission, self-smoothing, textured and roller coating epoxy resin system designed for cleanrooms. It is especially designed for the in cleanroom environment, where low VOC and particle emissions are mandatory and is also suitable as a hard wearing course for many industries, such as automotive, pharmaceutical, storage facilities and warehouses. Features include:
|
Sikafloor Top Coat WS
|
Sikafloor-Top Coat WS is a 2 component solventless top coat applied as a sealer coat over concrete and epoxy floors where early water exposure is expected. It provides a finish that prevents water spotting and blooming in cool and/or damp conditions.
Sikafloor-Top Coat WS is used as a top coat for Sikafloor-261 (base coat) in:
|
BASF Mastertop 1050 is a high-build epoxy resin based coating which is designed to protect concrete, masonry and metal surfaces from chemical attack and corrosion. It is supplied as a solventless, three component system consisting of resin, hardener and colour pack. It is recommended for:
- Concrete floors, walls, drains, pipe work, storage tanks, equipment to provide protection against chemical attack and corrosion.
- Waterproofing of concrete and masonry surfaces, above or below grade.
- Use in the following industries: food and beverage, oil, chemical and fertiliser processing, marine, mining, sewerage treatment plants, printing and paper manufacturing, engineering and automotive servicing.
- In areas where hygiene and health requirements are important such as commercial kitchens, catering facilities, hospitals and veterinary surgeries and laboratories.
- For the positive side of walls.
BASF Mastertop 1080
|
Mastertop 1080 is a durable floor coating based on a high build, hard wearing, two-component epoxy resin system. The cured floor provides excellent resistance to both chemical and mechanical damage. Mastertop 1080 has a user-friendly mix ratio and pot life and provides a hard, durable and glossy film. Mastertop 1080 may be applied to a wide variety of substrates (concrete, masonry, timber etc) and can be coloured to suit the environment. It is suitable for a wide variety of applications including:
|
Parchem Durafloor HP is a multi-component solvent-free epoxy resin high build coating. The formulation allows the incorporation of anti-slip grits and provides good chemical and abrasion resistance. Durafloor HP is available in a range of colours by adding Durafloor Colour Packs. Features are:
- Long lasting and easily maintained with good resistance to many industrial chemicals
- Slip resistance improves safety for plant and personnel
- Certified 'non-taint' around food stuffs during and after installation
- Provides an attractive satin finish
- Available in a wide range of light reflective colours to provide a brighter work area
Parchem Durafloor HS is a four component (Base, Hardener & 2 x Durafloor Colour Packs) epoxy resin high build coating. The formulation was chosen to allow the incorporation of non-skid grits and provide a high degree of chemical and abrasion resistance.
The finished floor is a satin finish coloured to individual requirements. It has excellent adhesion qualities, is impervious and easily cleaned. Features include:
The finished floor is a satin finish coloured to individual requirements. It has excellent adhesion qualities, is impervious and easily cleaned. Features include:
- Long lasting and easily maintained with good resistance to most chemicals and solvents
- Provides safety for plant and personnel while saving on cleaning and maintenance costs
- Economically installed compared to similar systems
- Excellent adhesion to concrete
- Provides an attractive satin finish
- Available in a wide range of light reflective colours to provide a brighter work area
Parchem Durafloor FC is a three-component solvent-free epoxy resin treatment consisting of base, hardener and colour pack. The formulation was chosen to allow the incorporation of non-skid grits and provide a high degree of chemical and abrasion resistance.
The finished floor is a semi gloss textured surface coloured to individual requirements. It has excellent adhesion qualities, is impervious and easily cleaned. Durafloor FC is available in a range of colours.
Features include:
The finished floor is a semi gloss textured surface coloured to individual requirements. It has excellent adhesion qualities, is impervious and easily cleaned. Durafloor FC is available in a range of colours.
Features include:
- 100% solids - high-build, solvent free floor coating suitable for application in confined areas or where volatile emissions are of concern
- Special fast cure - allowing rapid plant turnaround
- Chemically resistant - good resistance to a wide range of industrial chemicals
- Non-slip - provides safety for plant and personnel
- Economical - long lasting, easily maintained, saves on cleaning and maintenance costs
- Hygienic - does not support the growth of germs or bacteria
- Attractive - available in a wide range of colours to enhance the working environment