Mortar Grout Epoxy Supplies
Phone: (02) 9622 2251 
​
  • Home
  • Adhesives and bonding agents
    • Anchor Adhesives
    • New to old Concrete
  • Concrete Patch & Repair Products
    • Crack Repair
    • Epoxy Patching Compound
    • Pre-Cast Patching Compound
    • High Build Render Patch
    • Moisture Barriers
    • Pavement & Roadway Repair
    • Water Plug
  • Epoxy Resin binders for patching and repair
    • Asid Resistant
    • Liquid
    • Non-Sag
  • Levelling Compounds
  • Floor Coatings
    • Acid Resistant
    • Anti-Slip
    • Clear Sealers
    • Colourpacks
    • Dust Proofing
    • Low Odour
    • High Build 3-5mm
    • Food Grade
    • High Solids
    • Roll-on Coating
  • Grouts
    • Cementitious >
      • Class A
      • Class c
      • Rapid Set
      • Sand Free
      • Highest Strength
    • Polymer Grouts & Anchors >
      • Deep Pour Apoxy
      • Extended Worktime
      • Backing Grouts
      • Liquid Apoxy
      • Anchor Grouts
      • Apoxy Crack Injection
      • Injection Ports & Packers
      • Under Water Grouts
    • Water Reactive Injection Resins
  • Sealants for joint and crack filling and repair
    • Epoxy PU Hybrids
    • Fire Retardant
    • Elastomeric Gungrade
    • Elastomeric Pourable
    • Saw Cut and Control Joint Sealants
    • Water-Reactive Injection Resins
    • Silicone
    • Primers
    • Tape Systems
    • Backing Rod
    • Guns
  • Coatings
    • 2-Pack Epoxy Finish
    • Steel Primers
  • Waterproofing and water plug products
    • Acrylic Membrance
    • Cementitious Membrance
    • Bitumenous Membrance
    • Polyurethane Membrance
    • Water Plug
    • Water Stops
  • Contact Us
Call Now for Fast Sydney Wide Delivery 02 9622 2251
Floor leveling compounds and toppings
Product                                                        Description
Picture
Epirez Epoxy Self Levelling Binder (ESL)
Epoxy Self Levelling (ESL) Flooring Kit applied as a solventless self levelling mix to prepared subfloors. It provides an extremely hard wearing and chemically resistant seamless floor surfacing. The ultra smooth finish achieved means that it offers very attractive appearance and easy cleaning.

Epoxy Self Levelling (ESL) Flooring Kit is available in a wide range of attractive colours for application throughout industryand the community.

Areas of application include: Aircraft hangars , Animal shelters, Brewery / distilleries, Car dealerships / service, Kitchens, Commercial Laundries, Manufacturing / production, Plant rooms, Supermarkets, Shops / malls, Television studios, Bottling Plants, Clean rooms, Industrial workshops, Hospitals, Hygiene areas, Laboratories, Pharmaceuticals, Showrooms, School rooms  and Warehouses.

Picture
Bostik Ultralevel HD
Ultralevel HD is a polymer modified, single component, self levelling, cementitious heavy duty industrial floor overlay. Ultralevel HD is rapid hardening & has been formulated for maximum flow and easy application to achieve a smooth, flat surface without any shrinkage or cracking. It is recommended for:

• Reinstatement of new or existing concrete floors subject to foot traffic, industrial equipment, fork lift traffic or trolleys
• As final wearing coarse overlay or may be coated with an appropriate resin floor coating such as
Bostik Epoxycote WB or Paveseal SB
• Hard wearing, long lasting durable overlay
• Fast application, rapid cure minimises factory downtime
• Residential, commercial and industrial applications, light to medium industrial applications
• As stand-alone system
• Application thickness from 6mm-20mm in a single application

Picture
Bostik Ultralevel Primer


Bostik Ultralevel Primer Concentrate is designed for porous concrete substrates. A high performance one component, specially formulated polymer modified primer for use with the Bostik range of cementitious floor levelling compounds.

Picture
Bostik Ultralevel SL
Ultralevel SL is a self-levelling polymer modified cementitious underlay. A rapid hardening self-levelling, single component cementitious underlay, Ultralevel SL has been formulated to achieve a smooth flat surface with ease of application and maximum flow without any shrinkage or cracking. It may be used for:

• Underlayment for floor coverings such as carpet, ceramic tiles, vinyl, parquetry etc.
• Fast repairs of uneven concrete floors.
• Residential, commercial and medium industrial application.
• Application thickness from 2mm to 120mm in a single application.
• New construction and refurbishment projects.
• Flat smooth surfaces over existing concrete slabs.
• Levelling existing uneven concrete floors.
• New construction and refurbishment projects.

Picture
Sikafloor-81 EpoCem
Sikafloor-81 EpoCem is a 3-component epoxy modified cementitious self smoothening floor topping and temporary moisture barrier. It may be used as a self-levelling topping of 1.5-3mm thickness for:

• Levelling or patching concrete surfaces, both unfinished and after grinding or scabbling.
• Coloured EpoCem floors on non ventilated damp substrates with low aesthetic considerations (ask for advice)
• Floor toppings beneath epoxy protective coatings.
• Self levelling toppings that are to be covered with polymer floor coatings, carpets or wooden parquet.
• Repair and maintenance of vacuum concrete floors.

Picture
Sikafloor Level 25
Sikafloor-Level 25 is a one part, polymer modified, pumpable, self smoothing cementitious industrial grade screed.

Sikafloor-Level-25 is a versatile and durable sub-floor cementitious screed which can be applied manually or by pump to achieve rapid, flat, economic substrate levelling prior to the application of the final floor finish.

Typical uses are in warehouses, factories, manufacturing facilities, hospitals, commercial buildings, even residential and domestic properties etc.

It can also be used for “weekend” floor repairs and levelling pre-cast concrete planks.

Picture
Sikafloor Level 25 Primer


Sikafloor Level 25 Primer for use with Sikafloor Level 25 sub-floor cementitious screed
BASF Mastertop 540 is an economical, self-levelling, cementitious, non-structural, floor overlay intended for use over poured in-situ and precast concrete floors that are to be subject to light traffic conditions. Mastertop 540 has been specifically formulated to achieve a fast setting, level and flat surface with maximum available flow time.

Only water needs to be added at the job site to obtain the desired consistency for pumping or manual installation.

BASF Mastertop P-10 is a self-levelling, cementitious, non-structural, floor underlayment intended for use over poured in-situ and precast concrete floors which will be covered by carpet, vinyl, ceramic tiles or natural stone. Only water needs to be added at the job site to obtain the desired consistency for pumping or manual installation.

BASF Mastertop P-15 is an ultra-smooth, self-levelling, cementitious, non-structural, floor underlayment intended for use over poured in situ and precast concrete floors which will be covered by carpet, vinyl, ceramic tiles or natural stone.

Mastertop P-15 has been specifically formulated to achieve a fast setting, level and flat surface with maximum available flow time. Only water needs to be added at the job site to obtain the desired consistency for pumping or manual installation.

BASF Mastertop P Primer is an acrylic copolymer emulsion for priming and bonding of cementitious floor levelling compounds.
Picture
Dribond Feather Floor
Dribond Feather Floor is a cement based rapid setting trowel applied finishing underlay designed to smooth ridges, grooves, joins and gaps in the floor. Apply 0-3mm thick prior to installing a floor covering.
Uses

Feather finish irregular floors. Designed to smooth grooves, joins, gaps and grout joint lines over concrete, wood,terrazzo and ceramic tiles.
Features
• Exceptional bond strength.
• No primer required.
• Can be feather edged.
• Rapid setting.

Picture
Dribond Level Floor Standard
Dribond Level Floor Standard is a resin modified, fast setting cement based compound for use as an underlay and repair screed. Its smooth texture and high fluidity allow ease of placement, trowelling, feather edging and finish.
Uses
Use as an internal underlay prior to fixing timber (parquetry and direct stick timber floor etc) and tiles (ceramic and stone).The balance of its strength, smoothness, levelling and sanding properties make it ideal for fixing thick and thin bed adhesives. Apply to concrete and terrazzo, ceramic tiles from feather edge to 50mm.
Features
• Feather edge to 50mm thick
• 40Mpa strength
• Water resistant – rapid set
Picture
Dribond Level Floor Tuff
Level Floor Tuff is a resin modified, fast setting cement based compound for use as a levelling compound and repair screed. Its smooth texture and high fluidity allow ease of placement, trowelling, feather edging and finish.
Uses
A high strength, hard wearing, chemical resistant, resin modified cement based floor levelling and repair compound for internal and external use. LEVEL FLOOR TUFF performs like a sheet of steel levelling internal or external concrete floors in warehouses, driveways, parking lots, walkways, balconies etc.
Features
• Feather edge to 15mm thick
• 100Mpa strength
• Water resistant – rapid set

Picture
Dribond Level Floor V15
Dribond Level Floor V15 is a resin modified, fast setting, chemical cure, cement based compound for use as an underlay and repair screed. Its smooth texture and high fluidity allow ease of placement, trowelling, feather edging and finish.
Uses
Use as an internal underlay prior to fixing carpet and vinyl. The smooth finish and easy sanding properties makes the product ideal for thin bed adhesive fixing (eg. Carpet and vinyl). Apply to properly prepared concrete, terrazzo and ceramic tiles from feather edge to any thickness.
Features
• Durable and crack resistant (60Mpa)
• Self levelling: smooth float finish
• Rapid set - 2 to 4 hours
• Smooth finish and sandable
• Apply floor coverings in 15 hours
• Apply feather edge to any thickness
• Compatible with most adhesives
Picture
Dribond Super Prime
Super Prime is a water based acrylic primer with solvent like penetration properties for use on smooth/helicoptered/steel trowelled concrete. Super Prime improves adhesion and reduces air bubbles from rising through levelling compounds.
Uses
A primer for smooth, helicoptered concrete floors, that penetrates through the impervious laitance layer and improves
the adhesion of subsequent toppings.
Features
• Exceptional adhesion to smooth concrete.
• Reduces air bubbles rising through levelling compounds.
• Eliminates the need to etch or scabble concrete.
• Has solvent- like penetrating properties.

Picture
Dribond Primax
PRIMAX is a two pack, water resistant bonding primer with exceptional adhesion to difficult to adhere to surfaces.
Uses
PRIMAX will adhere to porous and non-porous surfaces that are difficult to adhere to if they are clean, structurally sound and uncontaminated i.e.
• Porous and non-porous surfaces
• Helicoptered (smooth finish) concrete
• Immersed applications
• Glazed ceramic tiles
• External areas.
Features
• Eliminates the need to mechanically roughen or acid etch concrete
• Water resistant
• Ideal as a primer over ceramic tiles.
Parchem Durafloor M consists of a special blend of selected polyurethane resins, curing agents and inert lightweight fillers which, when mixed can be applied to provide a 1 mm - 10 mm flexible, smooth membrane topping with unique application and performance properties.

Durafloor M provides a flexible, light weight, high bond, durable smooth underlay designed especially for marine applications.

It will bond to most substrates used in marine constructions including steel and aluminium. It eliminates the surface imperfections of construction and provides a smooth surface to allow the efficient application of the finished profile material such as carpet or vinyl.

Parchem Cemtop GP is supplied as a grey powder which requires only the addition of water to produce a self smoothing, free flowing material. The product is designed for installation by a continuous mixer pump, but can also be applied by hand.

Cemtop GP is designed as a heavy duty underlay which forms a smooth, hard surface for a variety of floor finishes including carpet and ceramic tiles.

It may, depending on the end use of the floor, be used in conjunction with high build epoxy resin based systems such as Durafloor SL (refer separate Technical Data Sheet).

Cemtop GP can be used in residential, commercial and light industrial applications and is suitable for both new construction and refurbishment projects.

Parchem Durafloor Leveltop is supplied as a grey powder which requires only the addition of water to produce a self smoothing, free flowing material. The product is designed for installation by hand mixing or a continuous mixer pump.

Durafloor Leveltop is an internal high performance, easily installed underlay which forms a very smooth, hard surface for a variety of floor finishes including carpet, ceramic tiles, rubber, sheet vinyl and timber flooring.

Durafloor Leveltop may, depending on the end use of the floor, be used in conjunction with high-build resin based systems such as Durafloor SL.

It can be used in residential, commercial and light industrial applications and is suitable for both new construction and refurbishment projects.

Parchem Durafloor Leveltop Rapid is supplied as a grey powder which requires only the addition of water to produce a smooth trowellable material. It is designed as a heavy duty floor repair compound which provides a very smooth surface allowing the smooth installation of carpet, ceramic tiles, sheet rubber, sheet vinyl and vinyl tiles.

Advantages:

  • Can be applied directly onto prepared concrete floors, eliminates traditional sand cement screeds
  • Dimensionally stable, will not curl or crack
  • Excellent adhesion to prepared substrates
  • Rapid hardening and curing allows speedy access for foot traffic and overlaying with carpet, vinyl etc.
  • One pack product eliminating on-site batching and ensures consistency of mixed product
  • Produces a very smooth surface essential for laying thin sheet coverings such as vinyl etc.
  • Can be ‘feather edged’
Parchem Durafloor Levelbase is supplied as a grey powder which requires only the addition of water to produce a self smoothing free flowing material. It is designed for installation by a continuous mixer pump, but can also be applied by hand.

Durafloor Levelbase is a heavy duty sub-base underlay which forms a smooth, hard surface to be used under Durafloor Leveltop and Fosroc Cemtop GP & XD where deep sections are required.

Durafloor Levelbase is Economical, provides very fast application by pump, enabling large areas of floor to be completed in a working day. It is dimensionally stable and can be installed in large areas.

Parchem Durafloor Feathertop is an aggregate free, trowellable cement compound, modified with strength developing additives and flow agents. Supplied as a powder which requires only the addition of water to produce a smooth trowellable material.

Durafloor Feathertop is a shrinkage controlled trowellable feathering cement compound which smooths out ridges, cracks and joints providing an even underlayment surface. The product's quick drying properties allow the final floor to be installed as soon as it hardens.

Durafloor Feathertop is compatible with other Parchem underlayment products and resin based systems such as Durafloor SL (refer separate Technical Data Sheet).