Mortar Grout Epoxy Supplies
Phone: (02) 9622 2251 
​
  • Home
  • Adhesives and bonding agents
    • Anchor Adhesives
    • New to old Concrete
  • Concrete Patch & Repair Products
    • Crack Repair
    • Epoxy Patching Compound
    • Pre-Cast Patching Compound
    • High Build Render Patch
    • Moisture Barriers
    • Pavement & Roadway Repair
    • Water Plug
  • Epoxy Resin binders for patching and repair
    • Asid Resistant
    • Liquid
    • Non-Sag
  • Levelling Compounds
  • Floor Coatings
    • Acid Resistant
    • Anti-Slip
    • Clear Sealers
    • Colourpacks
    • Dust Proofing
    • Low Odour
    • High Build 3-5mm
    • Food Grade
    • High Solids
    • Roll-on Coating
  • Grouts
    • Cementitious >
      • Class A
      • Class c
      • Rapid Set
      • Sand Free
      • Highest Strength
    • Polymer Grouts & Anchors >
      • Deep Pour Apoxy
      • Extended Worktime
      • Backing Grouts
      • Liquid Apoxy
      • Anchor Grouts
      • Apoxy Crack Injection
      • Injection Ports & Packers
      • Under Water Grouts
    • Water Reactive Injection Resins
  • Sealants for joint and crack filling and repair
    • Epoxy PU Hybrids
    • Fire Retardant
    • Elastomeric Gungrade
    • Elastomeric Pourable
    • Saw Cut and Control Joint Sealants
    • Water-Reactive Injection Resins
    • Silicone
    • Primers
    • Tape Systems
    • Backing Rod
    • Guns
  • Coatings
    • 2-Pack Epoxy Finish
    • Steel Primers
  • Waterproofing and water plug products
    • Acrylic Membrance
    • Cementitious Membrance
    • Bitumenous Membrance
    • Polyurethane Membrance
    • Water Plug
    • Water Stops
  • Contact Us
Call Now for Fast Sydney Wide Delivery 02 9622 2251
Floor Protection - Roll On Coatings
Product                                                        Description
Picture
Epirez Supatuff Heavy Duty Coating (HD) Neutral
Supatuff Heavy Duty Epoxy Coating (HD) is a high solids, high build, epoxy-based coating which provides excellent chemical and abrasion resistance to steel, concrete, timber and other surfaces. This product can also be used to prepare easy-clean floor surfaces for a wide range of industrial and commercial applications. Please check with ITW Polymers & Fluids Technical Department for preparation of other surfaces not specified.

Supatuff Heavy Duty Epoxy Coating (HD) has been especially formulated to provide long work time for ease of use. It can be applied at low temperatures (minimum 5ºC) and also over slightly damp concrete surfaces to produce a very hard wearing, colourful surface suitable for heavy foot traffic and rubber-tyred vehicles. The exceptional resistance to a wide variety of chemical spillage and fumes makes Supatuff Heavy Duty Epoxy Coating (HD) ideal for use in heavy industrial or marine environments.

Supatuff Heavy Duty Epoxy Coating (HD) has been independently tested and meets the requirements of AS/NZS 4020 - 2002 for use in contact with potable water.

Picture
Epirez Supatuff Floor Coating (FC)
Supatuff Floor Coating (FC) is a durable medium duty two-part epoxy coating designed to provide abrasion and chemical resistance to concrete floors. Supatuff Floor Coating (FC) has been especially formulated to provide fast dry and long work time for easy application. It can be applied at low temperatures (minimum 50C) to provide a very hard wearing, colourful surface suitable for heavy foot traffic and rubber-tyred vehicles.

Supatuff Floor Coating (FC) cures to a smooth semi-gloss finish which is easily cleaned and provides an economical and hard wearing surface for a wide range of applications. Resistance to a wide variety of chemical spillage and fumes makes Supatuff Floor Coating (FC) ideal for use in industrial or marine environments.

Picture
Epirez Supatuff Food Grade Finish (FG)
Supatuff Food Grade Finish (FG) is a solventless high build epoxy based coating which provides excellent chemical and abrasion resistance to steel, concrete, aluminium, timber and other surfaces. This product is ideal for the preparation of easy-clean floor and wall surfaces.  It has been especially formulated to provide long work time for ease of use with spray equipment.
However, drying time is short and recoating can easily be accomplished in the same shift.
The non-taint and low odour properties of Supatuff Food Grade Finish (FG) make it ideal for use in food preparation areas. Supatuff Food Grade Finish (FG) has been tested by the CSIRO Food Research Laboratory for effect on tainting of food. 
It requires the addition of an appropriate Epirez® Colourpack.

Picture
Epirez Supatuff Acid Resistant Coating (AR)
Supatuff Acid Resistant Coating (AR) is a specially formulated acid resistant coating designed for application as a 300 – 500 micron coating system for concrete walls, columns and pump footings.

Supatuff Acid Resistant Coating (AR) is also suitable as a sealer for concrete floors where extreme chemical resistance is required. It resists a wide range of acids, including concentrated sulphuric acid, as well as alkalies and solvents.

Supatuff Acid Resistant Coating (AR) may be used with broadcast aggregate as a non-slip finish over this system.

Supatuff Clear Coat Sealer (SC100) is a solventless low viscosity epoxy floor sealer. It has been developed to offer excellent surface wetting, flow and air release for use as a seal coat over Epirez® Easifloor (II) and Epoxy Self Levelling (ESL) flooring systems. For specific surface preparation of concrete, please refer to ITW Polymers & Fluids Technical Department.

Supatuff Clear Coat Sealer (SC100) provides a clear, hard wearing, easily cleaned seal coat over other Epirez® flooring systems and over ground concrete.

Picture
Epirez Epoxy Primer/Sealer (123)
Epoxy Primer/Sealer (123) is solvent free and low in viscosity. It has been developed to offer excellent surface wetting and compatibility with most Epirez binders, coatings and adhesives. It has been specially developed to bond to both dry and damp surfaces.

Epoxy Primer/Sealer (123) has a proven history in a variety of applications in the building and construction industry. Field usage is aided by a convenient mixing ratio.

Picture
Dribond Epeshield
Epeshield is a water-based solvent free two pack epoxy coating which hardens to a tough porcelainic or ceramic like finish.

It provides an impervious finish with excellent chemical resistance and can be applied over concrete, masonry and steel substrates for both exterior and interior use (will chalk externally).

Epeshield can be used for a wear and chemical resistant coating for manufacturing plants, concrete swimming pools, food processing industries, hospitals, laboratories, abattoirs, dairies, toilet floors, car parks and warehouses.

Picture
Sikafloor Duraseal
Sikafloor Duraseal is a one component penetrating non-yellowing protective sealer for concrete floors and driveways.
It is easy to apply by brush, roller or spray and has good resistance to oils, grease and tyre marks.
Sikafloor Duraseal is non-yellowing and suitable for exterior exposure. It is available in clear or grey.
Sikafloor Duraseal is used as a penetrating dust proof sealer for areas such as: 

    • Warehouses and storage facilities
    • Cart Parks and garages
    • Light industrial buildings.
Picture
Sikafloor 261
Sikafloor 261 is a 2-component solvent free pigmented epoxy resin based flooring system. The material can be classified into
three systems:
1. Sikafloor-261: a high build roll on coat
2. Sikafloor-261 SL: a smooth self levelling floor topping system
3. Sikafloor-261 NS: an anti-slip self levelling floor topping system
For an anti-slip self levelling floor topping use Sikafloor-261 NS for:
  • Wet and dry process areas ie. beverage industry, bottling plants, dairies, meat processing plant etc.
  • Workshops and factories
  • Warehouses, loading bays and ramps
  • Hangars
Picture
Sikafloor HS
Sikafloor-HS  is a high solids, heavy duty protective and decorative epoxy resin coating with excellent sag resistance.
Sikafloor-HS is used on surfaces where cleanliness and hygiene are important in places such as:
• Production and storage areas.
• Car parks and garages.
• Underground car parks.
• Food preparation industry.
• Factories and manufacturing plants.
• Warehouse and storage facilities.
• Dairy manufacturing and processing plants.
• Application on variable surfaces.

Picture
Sikaguard 62
Sikagard-62 is a two component high build thixotropic protective coating based on epoxy resin. When cured, it provides a hard, glossy film with high resistance to abrasion and chemical attack.

Sikagard-62 has been successfully used for concrete and steel protection in the following applications: waterproof internal reservoir coatings, interior or exterior (when not subject to UV irradiation) protective coating for silos, pipes, tunnels and galleries. Also in laundries, factories, chemical process areas, sewage treatment works, dairies etc as an impervious chemical resistant coating for floors and walls.

Picture
Sikaguard 63N
Sikagard-63N is a two component solvent-free high build thixotropic protective coating based on epoxy resin. When cured Sikagard-63N provides a hard, glossy film with high resistance to abrasion and chemical attack.

It is used as a heavy-duty abrasion resistant high build coating material, designed for high resistance against corrosion, weathering and moderate to severe chemical attack. Sikagard-63N is suitable for use on concrete, epoxy mortars, epoxy cements, sandblasted iron, steel, aluminium, non-polymer modified cementitious mortars and renders. Sikagard-63N can be applied as a protective coating for silos, storage tanks, pipes, tunnels and galleries. Also in laundries, factories, chemical process areas, sewage treatment works, dairies etc., as an impervious chemical resistant coating for floors and walls.
Picture
Sikafloor 261T
Sikafloor-261T is a thixotropic, two component, solvent free, pigmented, 100% solids high build epoxy coating for heavy duty and decorative finishes. It can be applied to vertical surfaces (walls & covers) in addition to providing a textured floor coating.

Sikafloor-261T is used on surfaces where cleanliness and hygiene are important.

Picture
Sikafloor 264
Sikafloor®-264 is a two part, solvent-free coloured epoxy resin. It may be used as roller coat for concrete and cement screeds with normal up to medium heavy wear e.g. storage and assembly halls, maintenance workshops, garages and loading ramps
or as a seal coat for broadcast systems. Its features include:
      • Good chemical and mechanical resistance
      • Easy application
      • Economical
      • Liquid proof
      • Solvent-free
      • Gloss finish
      • Slip resistant surface possible
Picture
Sikafloor Top Coat WS
Sikafloor-Top Coat WS is a 2 component solventless top coat applied as a sealer coat over concrete and epoxy floors where early water exposure is expected. It provides a finish that prevents water spotting and blooming in cool and/or damp conditions.

Sikafloor-Top Coat WS is used as a top coat for Sikafloor-261 (base coat) in:
    • Workshops and factories.
    • ‘Wet’ processing areas e.g. the beverage industry, bottling plants, dairies, meat processing plants, etc.
    • Warehouses, loading bays and ramps.
    • Hangers.
    • Used as a seal coat on mineral based substrates such as concrete, mortar, epoxy and EpoCem.
Picture
Sika Sikafloor 2530W
Sikafloor 2530W is a high performance, coloured, two component water dispersed epoxy resin based protective & decorative coating for floors.

It is used to provide a coloured seal coat system for light mechanical wear in areas such as: 

    • Warehouse and storage facilities
    • Car parks and garages
    • Food processing and preparation areas
    • Showrooms and display areas.
Picture
BASF Mastertop 1080
Mastertop 1080 is a durable floor coating based on a high build, hard wearing, two-component epoxy resin system.
The cured floor provides excellent resistance to both chemical and mechanical damage. Mastertop 1080 has a user-friendly mix ratio and pot life and provides a hard, durable and glossy film. Mastertop 1080 may be applied to a wide variety of substrates (concrete, masonry, timber etc) and can be coloured to suit the environment. It is suitable for a wide variety of applications including: 

    • Workshops
    • Chemical industries
    • Pharmaceutical and cosmetic facilities
    • Food and drink processing plants
    • Electronic and electrical industries
    • Mining industries
    • Water and sewerage treatment plants
    • Warehouses
    • Multi level carparks
BASF Masterseal 1120 is a premium grade solvent-based, non-yellowing acrylic sealer for beautifying, sealing and protecting slate, marble, quarry tiles, paving bricks, terrazzo and exposed aggregate panels or paving. Masterseal 1120 features include:
  • Seals and protects surfaces
  • Prevents staining and ingress of dirt, grime, oil or grease, foodstuffs, rust spotting, pitting dusting and discolouration
  • Glossy, durable finish
  • Brightens the colour and enhances the inherent natural beauty of slate and other similar materials.
  • Non-yellowing
  • Water-white transparent liquid which will not yellow indoors or outdoors. Maybe applied to light or dark coloured surfaces
  • Impervious surface
  • Resists water penetration, soap, mild acids and alkalis
  • Easy to maintain
  • Does not require subsequent waxing or polishing, surfaces are easy to clean
  • Easy to apply and dries quickly for quick return to service
BASF Mastertop TC 406 is a water based, two pack clear epoxy system formulated to provide ease of application, fast hardening and excellent adhesion to concrete. It is a hard wearing, anti-dusting sealer for a wide range of industrial and commercial applications. It is recommended for:Warehouses

  • Factories
  • Car parks
  • Plant rooms
  • General industrial applications
BASF Mastertop TC 450 is a solventless, high gloss, low viscosity epoxy coating designed for application as a clear hard wearing surface, primarily over ground concrete or vinyl flake flooring. It is recommended as a wear resistant finish to concrete, and for workshops and warehouses. Features of Mastertop TC450 include:

FEATURES AND BENEFITS
• Mild odour, light colour
• Minimal sweat-out, blush or bloom
• Resistant to mild acids/alkalis
• Easy application by roller or squeegee
• Excellent surface wetting characteristics
• Minimal water spotting
• Low viscosity
• Good adhesion
• Good mar resistance
BASF Mastertop TC 471 is a clear UV resistant two component polyurethane coating system for concrete in both internal and external applications. Mastertop TC471 features include:
• Provides an aesthetically pleasing matt or gloss finish
• Fast hardening
• Non yellowing, UV stabilised – external applications
• Good chemical and stain resistance
• Excellent scratch resistance
• Re-coatable
• Good general durability

BASF Mastertop TC 495 is a clear coating based on polyurethane resin. The cured material gives a tough and durable coating which will not yellow on exposure to UV light and may therefore be used externally. Mastertop TC 495 has excellent adhesion to concrete. Mastertop TC495 is  a single-pack product, is UV stable and non-yellowing and is recommended for:
• external protection of concrete
• wear resistant finish to concrete
• workshops
• warehouses

Parchem Nitocote EP410 is a highly chemical resistant, solvent free, epoxy coating system, for concrete and steel applications in applications such as sewer and chemical bund areas. It may be used to provide protection to concrete and steel structures in aggressive chemical exposure or immersion conditions. The material is particularly suitable for applications in process plants and sewage works.

Parchem Nitoflor FC120 HB is a heavy duty chlorinated rubber based floor coating which is resistant to yellowing from ultra violet radiation resistant to attack from automotive fuel spillages. It is suitable for use in heavy traffic areas such as light industrial traffic, stairs, fuel station forecourts, driveways and parking stations.

Parchem Nitoflor FC130 is a two-component water dispersed epoxy resin coating system supplied in pre-weighed packs ready for on-site mixing and use. The cured film forms a resilient, semi-matt seal to concrete and other substrates.

It is used to provide a dust-proof, easily cleaned surface which is resistant to most oils and liquids. It is suitable for use on walls and floors in warehouses, garages, light industrial and food processing areas, kitchens and other areas of pedestrian and light vehicular traffic.

Advantages

  • Durable - good resistance to abrasion
  • Economical - easy to apply, minimises cleaning costs
  • Water based - low odour
  • Good resistance to a wide range of chemicals
  • Can be applied to asphalt surfaces
Parchem Durafloor HP is a multi-component solvent-free epoxy resin high build coating. The formulation allows the incorporation of anti-slip grits and provides good chemical and abrasion resistance. It is available in a range of colours by adding Durafloor Colour Packs. Durafloor  HP provides a heavy duty, industrial / commercial coating for concrete floors and walls that is attractive and easily cleaned. It is highly resistant to chemical attack and the action of forklift vehicular and commercial type traffic and may be used in the food and chemical industry, hospitals, schools, kitchens, high traffic applications and many other installations.

Advantages

  • Long lasting and easily maintained with good resistance to many industrial chemicals
  • Slip resistance improves safety for plant and personnel
  • Certified 'non-taint' around food stuffs during and after installation
  • Provides an attractive satin finish
Parchem Durafloor HS is a heavy duty, commercial abrasion resistant treatment for concrete floors that is attractive and easily cleaned. Highly resistant to chemical attack and the action of commercial type traffic. Suitable for use in wet areas where strict levels of hygiene and cleanliness are required or where chemicals are manufactured, spilled or are an integral part of the process.

Used in chemical industry, schools, high traffic applications and many other installations.

Parchem Durafloor FC is a three-component solvent-free epoxy resin treatment consisting of base, hardener and colour pack. The formulation was chosen to allow the incorporation of non-skid grits and provide a high degree of chemical and abrasion resistance.

The finished floor is a semi gloss textured surface coloured to individual requirements. It has excellent adhesion qualities, is impervious and easily cleaned.

Durafloor FC is highly resistant to chemical attack and the action of vehicular and foot traffic. It is suitable for use in wet areas where strict levels of hygiene and cleanliness are required or where chemicals are manufactured, spilled or are an integral part of the process. May be used in the food and chemical industry, hospitals, schools, kitchens and many other installations.
Parchem Durafloor PU is a single pack, high performance, moisture-curing high build polyurethane coating, formulated for both interior and exterior applications to provide a clear, high gloss, high abrasion resistant finish.

It has UV protection added and is very fast curing.