Coatings - Steel Primers
Product Description
Epirez Epoxy mastic Metal Primer
|
Epoxy Mastic Metal Primer (215) is a high build epoxy primer specially formulated to provide good adhesion and protection to poorly prepared steel surfaces. It provides an anti-corrosion protective barrier to structural steel surfaces subject to ultra-violet weathering, industrial pollution and precipitation. It can be applied over sound, aged coatings and has the ability to protect sharp edges, bolts, angles and other similar areas due to excellent high build characteristics.
In situations where only minimal surface preparation is allowable, Epoxy Mastic Metal Primer (215) will provide the best protection under the circumstances. Epoxy Mastic Metal Primer (215) may be coated with various Epirez® topcoats. |
Galmet Ironize
|
Galmet Ironize is a fast reacting rust converter and sealer which can be applied directly to a rusty surface. It reacts with rust to form a black chelate compound which binds to the surface. To fully protect metal substrate, apply Galmet Keytite Steel Primer followed by Galmet Rustpaint within 3 months of surface preparation with Galmet Ironize.
|
Galmet Keytite Etch Primer
|
Galmet Ironize is a fast reacting rust converter and sealer which can be applied directly to a rusty surface. It reacts with rust to form a black chelate compound which binds to the surface. To fully protect metal substrate, apply Galmet Keytite Steel Primer followed by Galmet Rustpaint within 3 months of surface preparation with Galmet Ironize.
|
BASF Barrafer A is a cementitious, ready-to-use, one component compound based on a special synthetic resin dispersion. It is used for the protection of steel reinforcement against corrosion in concrete. Barrafer A requires only the addition of water to yield a thixotropic compound that is easy to apply to the reinforcing steel with a brush.
As a result of its high alkalinity level it forms an excellent barrier against acidic gases (CO2 SO2 ) and salts.
Barrafer A protects reinforcing steel permanently against corrosion.
As a result of its high alkalinity level it forms an excellent barrier against acidic gases (CO2 SO2 ) and salts.
Barrafer A protects reinforcing steel permanently against corrosion.
Sikatop 110 Epocem is a cement-based epoxy-modified 3-component anti-corrosion coating and bonding agent.
Use as an anti-corrosion coating for reinforcement steel, for repairs to reinforcement concrete where there is corrosion of the underlying reinforcement steel, for the preventive protection of reinforcement steel in thin reinforced concrete section.
As a bonding agent for use on concrete, mortar or steel for repairs to concrete using SikaTop patching and repair mortars or for bonding new concrete to old.
Use as an anti-corrosion coating for reinforcement steel, for repairs to reinforcement concrete where there is corrosion of the underlying reinforcement steel, for the preventive protection of reinforcement steel in thin reinforced concrete section.
As a bonding agent for use on concrete, mortar or steel for repairs to concrete using SikaTop patching and repair mortars or for bonding new concrete to old.
Sika Monotop 610
|
Sika MonoTop-610 is a one-component, cementitious, polymer modified mortar containing silica fume and corrosion inhibitors. It is used as a treatment for preventing continued corrosion of steel reinforcement in concrete, and as a bonding bridge for concrete patching mortar. Sika MonoTop-610 is an integral component of the Sika MonoTop Concrete Repair System
|